Majacraft Suzie Professional Руководство - Страница 6
Просмотреть онлайн или скачать pdf Руководство для Вращающиеся колеса Majacraft Suzie Professional. Majacraft Suzie Professional 12 страниц.
Также для Majacraft Suzie Professional: Руководство (12 страниц)
Печатать страницу
5. Spinning Head
Required:
1 M6 60mm Gold JCB (2 1/2") bolt (in the handle
assembly)
4mm allen T wrench (in the hardware bag)
1 Wood spacer tube (in the handle assembly)
Spinning Head
Fit the pedals using the twelve gold 25mm screws provided. Match
the holes in the hinges with the holes at the front of the base. The
long side of each pedal goes nearest to the Base assembly.
4b
The M6 60mm bolt and wood spacer are attached to the handle.
You must remove it first. Take the spinning head and slide it down
into the handle. Push the JCB bolt in a little way through the hole
in the top of the handle. Align the wooden spacer tube in the
handle so the bolt will can be pushed through the centre.
5b
5d
5c
The spinning head can be raised or lowered to suit
the tensioning of the drive belt and the height at
which you wish to spin.
6
4c
5a
Screw the JCB bolt into
place without tightening
it fully. Position the
head near the top of the
handle and then tighten
the JCB bolt firmly. There
is no need to over-
tighten this.
majacraft