Brisa PACTRIO Руководство по эксплуатации - Страница 5

Просмотреть онлайн или скачать pdf Руководство по эксплуатации для Увлажнить Brisa PACTRIO. Brisa PACTRIO 11 страниц. Cooler/humidifier
Также для Brisa PACTRIO: Руководство по эксплуатации (12 страниц)

Печатать страницу

41°F - 109°F

REMOTE

CONTROL:

Control Panel

1 ON / OFF MODE

3. Operating Instruction

2 VERTICAL AIR FLOW

• Functional keys

OSCILLATION

1) ON/OFF

3 HORIZONTAL AIR FLOW

will sound and enter into the standby mode. Other keys are invalid except the

OSCILLATION

ON/OFF key.

4 SPEED MODES

Press again to activate the appliance. It will blow heat when the PTC is

behind wind outlet. While the PTC is not at the wind outlet, it blows cool wind.

Press a third time and the appliance shuts off. Exit to stand-by mode. Under

heating function, the appliance shuts off 5 seconds later.

5 COOLER / HUMIDIFIER MODE

6 HEAT / COOLER MODE

2) Speed

corresponding wind speed indicator will light accordingly. Alternate order:

low-medium-high-natural. - Sleep mode.

7 TIMER

Normal mode

High

Medium

Low

SPECIFICATIONS:

• Rated voltage/frequency: 120V/60Hz

• Power: 70W in cooling function, 800W in low heat, 1200W in hi heat

• Rotation speed: High - 1350 RPM Medium - 1150 RPM Low - 950 RPM

• Timer: 1-8 hours

• Air flow: 153 cfm

• Noise: >55dB

• EER: > 9.0

• Evaporation capacity: .26 gal/hour

• Water tank capacity: 1.6 gal

• Net weight: 17.6 lb

• Dimension: 11 in. x 13.6 in. x 27.1 in.

RH<95% (77°F)

Remote Control Panel

Will turn the entire unit on or off

Press this key to begin continuous air flow oscillation up and down; press again to

fix air flow angle in place

: Plug in the appliance, turn on the main power, the buzzer

Press this key to begin continuous air flow oscillation right and left; press again to

fix air flow angle in place

LOW Mode: will operate fan turbine at low speed

MED Mode: will operate fan turbine at medium speed

HI Mode: will operate fan turbine at high speed

NATURAL Mode: will operate fan to mimic a natural breeze by alternately

increasing and decreasing the speed

SLEEP Mode: will operate the fan at LOW speed after two 30 minute periods of

HIGH and MEDIUM speed

Recirculates and filters the water located at the base to generate cool air

: Press this key to set wind speed and wind mode. The

FAN Mode: will operate turbine as a fan only

HEATER Mode: will operate as a heater on a low speed setting

HI Mode: will operate as a heater on a high speed setting

Press this button multiple times to alternate from FAN to HEATER to HI

Allows you to toggle and set a specific time duration for operation (1-8 hours of

preset use)