Jäger Direkt OPUS-FUNK plus Инструкции по установке и эксплуатации - Страница 4

Просмотреть онлайн или скачать pdf Инструкции по установке и эксплуатации для Контроллер Jäger Direkt OPUS-FUNK plus. Jäger Direkt OPUS-FUNK plus 4 страницы. Actuator four-way eb for funk plus transmitter
Также для Jäger Direkt OPUS-FUNK plus: Инструкции по установке и эксплуатации (2 страниц)

Печатать страницу

Jäger Direkt GmbH & Co. KG • Hochstraße 6 • 64385 Reichelsheim • Tel.: +49 (06164) 930050 • Fax: +49 (06164) 930069 • e-mail: [email protected] • Internet: www.opus-schalter.de

Functional description of the transmitters

Opus

-Funk Plus wall transmitter

Button

Down

7.1 Standard function (Function 1)

The up/down/stop function for blinds/shutters, including slat

adjustment for shutters, is executed by briefly activating the

buttons on the transmitter (tip operation).

Longer activation of the buttons will start continuous operation

with adjustable travel time (parameter).

Button

Function

Press button UP

Tip operation UP/DOWN

DOWN

briefly

Press button UP

Continuous operation

DOWN

for longer

UP/DOWN (parameter)

Parameter

Running time 120 s

Running time 10 s

Running time 30 s

Running time 60 s

Running time 5 min

Running time 10 min

Running time 60 min

7.2 Continuous operation (Function 2)

An activation of the buttons will always start continuous

operation with adjustable travel time (parameter).

Button

Function

Press button

Continuous operation

or DOWN

UP/DOWN (parameter)

Parameter

see Point 7.1

7.3 Momentary contact (Function 3)

Activating one of the transmitter's buttons will cause the up/

down motion of blinds and shutters for a selected period

(parameter), terminated by a Stop function; for shutters this

function includes slat adjustment. The Stop function occurs

when the button is released. The outputs are reciprocally

interlocked.

Please note that reversing the direction of motion may result

in reversal of the motors without any intervening switching time!

In this case one must be sure to use blind and shutter motors

which permit such direct reversal of motion direction.

Button

Press button UP

or DOWN

Release button UP

or DOWN

Parameter

see Point 7.1

7.4 Automatic mode (Function 4)

Caution!! Already integrated for future applications!

Activating automatic mode opens up options for using the

actuator in combination with a sun sensor (Point 7.6).

Button

Function

Automatic mode on

Press button DOWN

or I

Press button UP

or O

Automatic mode off

Parameter

Sun mode

561314-Rev01_070122.pdf

7.5 Safety function (Function 5)

The transmitter can be used, for example, to service blinds/

shutters and, with the Radio Plus window contact, can also be

used to latch opened patio doors in place.

Button O

One transmitter is assigned on the respective actuator and

the actuator's Function 5 is programmed.

Button I

Window contact

Magnet

Caution!! The window contact must be assigned or deleted

with its programming button on a actuator.

Following activation of Function 5's programming, the

magnetic contact of the window contact must be activated one

time to permit its recognition! This can also be done before

the the window contact will be mounted.

Wall transmitter button

Press button DOWN

Press button UP

Status window contact

Window contact opened

Window contact closed

Parameter

Wall transmitter safety function

Window contact safety function

7.6 Sun sensor mode (Function 6)

Caution!! Already integrated for future applications!

With automatic mode ON (Point 7.4), an ON signal from the

sun sensor will cause all shutters/blinds and awnings to be

switched to „DOWN" (with a 1 s slat adjustment for shutters)

and an OFF signal will result in the „UP" command. This is

especially recommended for awnings.

The time setting for lowering is adjustable (parameter).

Caution!! Please follow the sun sensor's instructions.

Sun sensor

On signal

Off signal

Parameter

Running time 10 s

Running time 13 s

Running time 16 s

Running time 20 s

Running time 25 s

Running time 30 s

Running time 40 s

7.7 Scenes (Function 7)

When multiple blinds/shutters are controlled with Radio Plus

actuators and their assigned transmitters, this function can

Function

be used to store the current positions of blinds/shutters as

UP/DOWN

a scene, which can then be called up later on.

Stop command

This is done by assigning all actuators involved in the scene

to an additional transmitter, in which Function 7 has been

programmed for each of the actuators.

When the blinds/shutters are in the desired positions, the scene

must then be stored by pressing one of the buttons on the

transmitter used for the scene for longer than 2 s.

Briefly pressing one of the transmitter's buttons will cause

one of the four stored scenes (A ... D) to be called up and

automatically adjust the positions of blinds/shutters accordingly.

Button

Press button UP

button O briefly

Press button DOWN

or button I briefly

Press button UP

button O for longer

Press button DOWN

or button I for longer

Parameter

1 Scene A (button O or

2 Scene C (button O or

max. 5mm

Function

or I

UP and interlock

or O

Release

Function

Interlock

Release

Function

DOWN

Function

Switch on scene

A or C (parameter)

Switch on scene

B or D (parameter)

Storage scene

A or C (parameter)

Storage scene

B or D (parameter)

), scene B (button I or

), scene D (button I or

8. Ranges between transmitters and actuators

The range of the Radio Plus radio signals decreases as the

distance between transmitter and actuator increases.

If the normal range between transmitter and actuator is

insufficient, an Radio Plus Repeater (561.400) can be

employed to increase range.

The range between the transmitter and actuator in a house

is approx. 30m (line-of-sight connection) and 100m in halls.

The transmission range depends on the materials used

in the building:

Material

Typical range

Masonry

20m (max. 3 walls)

Reinforced concrete

10m (max. 1 wall/ceiling)

Drywall/wood

30m (max. 5 walls)

Limiting the range of the radio signals due to:

• Installing the transmitter or actuator in the immediate vicinity

of materials with metal constituents, or metal objects.

A distance of at least 10 cm should be maintained.

• Installing the transmitter/actuator on the ground or at

ground level.

• Moisture in the materials

• Devices, which also emit high frequency signals, such as

e.g. computers, audio and video equipment, electronic

ballasts for illuminants.

A distance of at least 0.5m should be maintained.

9. Error analysis in the case of radio interference

For a new or pre-existing system:

• Check the system voltage of the actuator.

• Check if the actuator is receiving a radio command.

• Check if the actuator is connected as specified.

• Check the operation of the connected consumers.

• Delete all transmitters in the actuator, and reprogramme

the actuator.

• Check if any changes have been made around the system

that could generate problems (metal cabinets, walls or

furniture has been moved, etc.).

If possible, restore things to their original status.

• Mount the transmitter or actuator at a better location.

The actuator independently turns ON and OFF:

• This can occur when an outside transmitter is activated

within the actuator range that was previously programmed

in the actuator.

• Delete all transmitters in the actuator, and reprogramme

the actuator.

A transmitter does not work:

• Take the transmitter and move toward the actuator.

If the system still works at a closer distance, the transmitter

was installed outside of the transmission range, or there

was interference.

• Mount the transmitter or actuator at a better location.

10. Warranty

These operating instructions are an integral part of both the

appliance and the terms of warranty. They must be furnished

to the user. The technical design of the appliance is subject

to change without prior notification.

Jäger-Direkt products are manufactured using state of the

art technologies in compliance with prevailing national and

inter- national regulations, and are quality tested. The right

of compensation apllies according to payment terms and

delivery conditions of Jäger Direkt GmbH & Co. KG.

Further information to application and parameterisation for the

Opus radio plus product family under www.opus-schalter.de.

)

Jäger-Direkt Radio Plus products may be sold and used

)

in EU countries, Switzerland, Iceland and Norway.

The products conform to R&TTE Directive 1999/5/EC

and meet EU regulations.

GB - 2