Majestic RUBY35IN Инструкции по установке - Страница 3

Просмотреть онлайн или скачать pdf Инструкции по установке для Крытый камин Majestic RUBY35IN. Majestic RUBY35IN 3 страницы. Direct vent gas fireplace inserts
Также для Majestic RUBY35IN: Краткое руководство по эксплуатации (6 страниц)

WARNING
Delayed Ignition Risk
• Place media according to instructions.
• Do NOT place media in a position that they may
fall into area in front of pilot.
• Do NOT use any media other than the media
supplied with this fireplace.
• Do NOT exceed one layer of media on base pan.
Fireplace will not function properly.
Delayed ignition may occur.
WARNING
Risk of Asphyxiation or Fumes.
• Place media according to instructions.
• Do NOT place media in area between glass and
firebox.
• Do NOT place media in a position that they may
fall into area between glass and firebox.
• Do NOT use any media other than the media
supplied with this fireplace.
Fireplace will not function properly.
Gas leak may occur.
REAR MEDIA LEDGE
ROCK STOP
Figure 3. Glass Media Installed
12. If installing a stone kit, refer to the instructions in
the next section.
13 Remove rock stop.
Consumer: Retain rock stop for future maintenance
or service needs.
14. Reinstall seal plate, glass assembly and decorative
front.
WARNING! Glass seal plate must be properly installed
Risk of elevated component temps and carbon monox-
ide exposure.
15. Re-connect electrical supply and turn on gas.
Note: A tall, deep orange flame should be avoided; this
type of flame may cause increased soot residue. If this
type of flame is noticed, try adjusting the media directly
beneath the flame. If all flames appear to be tall and deep
orange in color, then open the primary air shutter.
Majestic • CKRUBY30, CKRUBY35 Contemporary Kit Instructions • 2542-939 Rev. B • 2/19
Installing Stone Kit
NOTE: Rock Stop Jig must be in place to install
stones.
1. Place stone jig on glass media with "STONE JIG" fac-
ing up. Ensure that the stone jig sits flush against the
rock stop. See Figure 4.
2. Place stones in a random manner in the open spots on
the base pan.
3. Remove stone jig and then the rock stop.
Consumer: Retain both stone jig and rock stop for
future maintenance or service needs.
ROCK STOP
STONES
Figure 4. Stone Jig in Place
Service Parts
MODEL
DESCRIPTION
Burner Assembly
CKRUBY30
Exhaust Baffle
Base Pan
Burner Assembly
Exhaust Baffle
CKRUBY35
Base Pan
Insulation Board
Rock Stop Assembly
BOTH
Stone Placement Jig
Pilot Shield
Please contact your Majestic dealer with any questions
or concerns.
For the location of your nearest Majestic dealer,
please visit www.majesticproducts.com.
Majestic, a brand of Hearth & Home Technologies
7571 215th Street West, Lakeville, MN 55044
www.majesticproducts.com
STONE JIG
PART NUMBER
2535-007
2535-138
2542-131
2536-007
2536-138
2544-131
2536-158
2535-197
2542-198
2535-120
3