Bristan DUL3 THBSM C Руководство по установке - Страница 5
Просмотреть онлайн или скачать pdf Руководство по установке для Сантехническая продукция Bristan DUL3 THBSM C. Bristan DUL3 THBSM C 20 страниц. Thermostatic bath shower mixer
Печатать страницу
Specifications
Product Code
DUL3 THBSM C
AS2 THBSM C
Maximum static pressure- 10.0 bar
Maximum outlet temperature- factory preset to 38
System Requirements:
Gravity fed hot & cold (Equal pressures)
Gravity fed hot & cold (Differential pressure, maximum ratio 5:1)
Unvented systems
Instantaneous water heater (Combination boiler)
Pumped Systems
Note: When using a Pumped System, we recommend that an Essex Flange is used.
Supply Requirements:
Minimum cold water supply temperature: 5ºC
Maximum cold water supply temperature: 25ºC
Maximum hot water supply temperature: 80ºC
(a maximum hot water supply of 60-65ºC is
recommended for ablutionary purposes).
Note: The inlet hot water temperature must be at least 10ºC above the required blend
temperature (e.g. outlet temperature 43ºC: Minimum hot supply 53ºC).
Nominally equal (balanced) inlet supply pressures are recommended for optimum
performance. If pressures are unequal, then a pressure reducing valve should be
used.
Valves Operating outside of these conditions of use cannot be guaranteed as type 2 valves.
Need help? Give us a call on 0844 701 6273 and speak to one of our trained advisers.
Working pressure
Min
Max
0.5
5.0
0.5
5.0
Inlet
3/4" BSP Threaded Tail
3/4" BSP Threaded Tail
ºC
Minimum
distance from
cold water tank to
outlet (metres)
5
5
5