Bristan Nero BNNRBSME8C Инструкции по установке и руководство пользователя - Страница 2

Просмотреть онлайн или скачать pdf Инструкции по установке и руководство пользователя для Сантехническая продукция Bristan Nero BNNRBSME8C. Bristan Nero BNNRBSME8C 2 страницы.

Печатать страницу

Operation

Divert to

Handset

Hot

Maintenance - Clean/Replace Outlet

IMPORTANT

Isolate the

water supply

before starting!

Place flow

straightener parts

suitable solution

Unscrew the flow

and soak until

straightener

fully de-scaled.

Maintenance - Valve Cleaning

Remove

the screw

adaptor

and valves.

Loosen the handle grub

2.5

screws. Remove handles.

General Cleaning

Cold

Bristan products are made from premium

materials, with hand polishing and

electroplated finishes.

Your taps or shower should be regularly

cleaned with warm water, a mild pH-neutral

liquid soap, and polished with a soft cloth.

Any residues from soap, toothpaste,

shampoos and shower gels can cause

blemishes if not rinsed off straight after use.

Household bleaches and cleaners contain

harsh chemicals and may damage the

surface finish. Avoid using abrasive cloths,

scouring pads, scrub sponges, steel wool

or anything similar.

Some surfaces such as nickel and pewter

may be affected by the dye found in some

cloths, so it is also important to avoid

hanging cloths on spouts.

Reverse the

maintenance

steps to re-

place the flow

straightner.

Servicing Your Tap

We recommend servicing your tap

at least once every year to prolong

its life. To see a video showing

in a

how to remove the cartridge for

servicing, scan the QR code

with your smart phone or tablet.

Alternatively visit www.youtube.com/BristanTV

Reverse the

maintenance

steps to replace

the handles.

Troubleshooting

Symptom

Cause

Partially closed isolation valve.

Instantaneous water heater cycles on

and off as flow rate or pressure is too

low.

Head of water is below the

No flow or

minimum distance required.

low flow

Hot or cold water being drawn off

rate

elsewhere causing pressure changes or

instantaneous boiler temperature

changes.

Airlock or partial blockage in the supply

pipework.

This is normal for a short time after using

Water

the taps.

dripping

If water continues to drip,

from taps

possibly due to the ceramic disc valves

Closed isolation valve.

Taps do not

turn on

Mains water supply turned off.

Notes

Please use this space for any notes you or your installer may have regarding the

Place vaves

in a suitable

solution and

soak until

fully de-scaled.

At Bristan, we want to make things as easy as possible for our customers.

That's why we offer solid guarantees on all our products, effective from the date of purchase,

to give you peace of mind.

To start your free guarantee simply scan the QR code and register your product.

Alternatively visit www.bristan.com/register to register your product via a computer.

For full guarantee terms and conditions visit www.bristan.com/guarantees.

Remedy

Open isolation valve.

Increase water flow rate or pressure through system.

Refer to specification for minimum distance required.

Do not use other water outlets when using the taps.

Flush through pipework to ensure removal of debris

and any airlocks.

This is caused by residual water tension, the build up

of water in the tap body.

Remove valves and clean, refer to 'Maintenance'

section before starting any maintenance.

Open isolation valve.

Turn on mains water supply.

installation/plumbing of this product.