AIRFLO AFV30 Руководство по эксплуатации - Страница 2
Просмотреть онлайн или скачать pdf Руководство по эксплуатации для Пылесос AIRFLO AFV30. AIRFLO AFV30 4 страницы. Wet & dry vacuum cleaner
Печатать страницуParts
Handle
Hold the handle to
lift up the machine
ON / OFF switch
"O" for power turn off
" " for power turn on
Dust shaking function
Turn off the power,
press the dust removing
button at the bottom,
then release it quickly.
The button will go back
to its original position.
Operate it repeatedly
to shake off dust.
Hanging wire function
You can hang the wire
for storage
Filter assembly and disassembly
Pull out the machine head
Take out the dust removing board
Pull out the clips to pull out
Twist the knob counterclockwi se,
the machine head
then take out the dust removing
board
Clips
Pull out the clips to open,
conversely, to lock it.
Hose
To connect the hose, move
the locker to the left
side and insert the hose
connector into the
suction mouth. Then,
release the locker to
make it tightly locked.
Conversely, to separate it.
Blowing function
Move the locker to the right side,
insert the hose connector into the
blowing mouth, then release the
locker to make it tightly locked. Move
the blowing control bar to the left for
blowing function on and to the right
for blowing function off.
Rod assembly storage
function
Put the rod assembly
here for storage to
save space
Install the HEPA and Dust removing board
Replace the HEPA filter
Twist the HEPA counterclockwise to
Twist the HEPA
lock, then pull out the dust
clockwise to take it off
removing board. Tighten the knob.
Pull out the filter
Troubleshooting
Reasons
Problem
Vacuum
1. The plug is not inserted tightly and
is not
correctly.
working
2. The socket is switched off.
1. The hose or tube is blocked
2. The filter is blocked
3. The machine is not fastened tightly
4. The air-out filter is blocked
Suction
5. The adjust window in the hose is
is weak
open
1. The filters are blocked
Abnormally
2. The hose, rod or accessories are
loud noise
blocked
If you still can not solve the problem, take it to a service center, not repair by yourself.
Solutions
1. Insert the plug into the socket
tightly
2. Ensure that the socket is
switched on
1. Clean up all the obstructions
in the hose or tube or filter
2. Clean or replace the filter
3. Make sure that the adjust
window is closed
1. Clean and maintain the filter
2. Get rid of all obstructions