ADEZZ Canna Краткое руководство по эксплуатации - Страница 2

Просмотреть онлайн или скачать pdf Краткое руководство по эксплуатации для Газонное и садовое оборудование ADEZZ Canna. ADEZZ Canna 5 страниц. Fibreglass planters

Печатать страницу

Placement

1. Provide a flat, solid surface. If not done carefully, it

can create tension in the product which can result in

damage to the product.

Always drill drainage holes in the bottom of

Note!

the planter, use (if present) the raised parts of the

bottom of the planter.

2. If desired, install an overflow pipe in the designat-

ed place at the bottom of the planter to create a wa-

ter reservoir.

3. Reinforcement ribs in planters are essential for the

construction and dimensional stability of the planter.

These must never be removed!

4. Always provide sufficient breathing space (mini-

mum 1 cm) around the planters to prevent moisture

trapping.

Planting advice

5. Fill the planter with a layer of hydro grains about

10cm high. Place a moisture-permeable anti-root

cloth over the hydro grains.

Note!

Raise the cloth at the edges at least 10 cm for

an ideal effect.

6. Cover the anti-root cloth with a layer of airy soil

mixture adapted to the planting to be applied.

Note!

The soil in the planter should never be tamped

down, this can cause damage to the planter.

Install wheels

1. Wheels are supplied separately with the planter.

Assembly is very easy, see images on the right.

2. Position the wooden board with the four large

holes upwards and press the carriage bolts firmly all

the way in (see detailed picture).

3. Then slide the wheel over the bolt and tighten it

with the supplied nut.

4. Then place the wooden board with wheels under

the planter, they do not need to be connected to

each other.

Reinforcement rib

Place for drainage

hole and overflow pipe

Loose soil

anti-root cloth

Hydro grains

Carriage bolt

Wheel

Nut

2/5