Centrometal EKO-CK P 25 Использование и обслуживание - Страница 8
Просмотреть онлайн или скачать pdf Использование и обслуживание для Пеллетная печь Centrometal EKO-CK P 25. Centrometal EKO-CK P 25 20 страниц. Cm pelet-set (14-35 kw)
Печатать страницу
Technical instructions Cm Pelet-set
Pr01: Boiler set temperature
Factory setting for winter firing regime:80°C.
Factory setting for summer firing regime: 65°C.
Available setting: min. 65°C; max. 90°C.
The boiler set temperature can be changed by
pressing + or - buttons.
By SET button you go to other menu; Pr02.
Pr02: Enabling heating of sanitary water in
tank not built in the boiler (located next to the
boiler)
Factory setting: OFF – sanitary water heating
switched off.
Available setting: ON (turned on) and OFF (turned
off).
In order to be able to turn on this function, it is
necessary to have a built in sanitary water sensor
(to connector 4). By pressing of + and - buttons
sanitary water heating is turned on (ON) or turned
off (OFF). By putting of Pr02 to ON and
pressing SET button we enter sub-programme
Pr02.
Sub-programme
Pr02:
temperature
Factory setting: 50°C
Available setting: min. 40°C; max. 80°C
If is inbuilt sanitary water sensor and Pr02 on ON,
sanitary water set temperature can be changed
with buttons + and -. By SET button you go to
other menu; Pr03.
Pr03: Digital clock setting
By entering Pr03 menu digital clock figure starts
flashing which can be set by + and - buttons. By
pressing of SET button the minute figure starts
flashing. Correct value is set by + and – buttons
and confirmed by pressing SET button.
Pr04: Day setting
Pr04 programme enables setting of a day of a
week
(important
for
activating times).
DAY 1 = Monday (LED diode switches on
DAY 2 = Tuesday (LED diode switches on
DAY 3 = Wednesday (LED diode switches on
)
DAY 4 = Thursday (LED diode switches on
DAY 5 = Friday (LED diode switches on
DAY 6 = Saturday (LED diode switches on
by
Sanitary
water
set
correct
functioning
)
)
)
)
of
)
8