Gamma Progression ST II Руководство пользователя - Страница 9
Просмотреть онлайн или скачать pdf Руководство пользователя для Аксессуары Gamma Progression ST II. Gamma Progression ST II 19 страниц.
Также для Gamma Progression ST II: Руководство пользователя (17 страниц)
Печатать страницу
STRINGING THE FRAME
until the "1" or "2" mark on the knob aligns with the line on the knob support. To decrease
tension by 1 or 2 lbs., turn the knob clockwise until the "2" or "1" mark on the knob aligns with
the line on the knob support.
Travel Stop
10
Setting Tension
The X-ST utilizes a rotary adjusting knob
along with a linear tension scale to indicate
the tension setting. The scale is divided into
3 lb. increments and each 1/3 turn of the ten-
sion knob changes tension by 1 lb. To set the
desired tension, rotate the tension knob and
align the mark on the spring guide with the
desired tension setting on the scale. When
the "0" mark on the knob aligns with the line
on the knob support the tension will be that
indicated on the scale. To increase tension
by 1 or 2 lbs. turn the knob counterclockwise
Tensioner Travel Stop
The tensioner bar is equipped with a tensioner
travel stop to limit travel of the tensioner along
the bar and prevent contact between the
tensioner and the racquet mounting system
while stringing. The travel stop is located
about midpoint along the tensioner bar below
the gear track.
To disengage the stop, pull and hold the knob,
rotate 90 degrees and release. To engage the
stop, repeat the above procedure until the
travel stop pin protrudes beyond the opposite
surface of the tensioner bar.
Setting the Gripper Jaw Spacing
The gripper jaws of the tensioner are adjust-
able to accommodate varying string gauges.
If the string slips through the gripper jaws
while pulling tension, rotate the gripper jaw
adjustment screw counter-clockwise.
If the string is damaged while pulling tension,
rotate the gripper jaw adjustment screw
clockwise.
The jaws will be properly adjusted when
there is enough pressure to securely grip the
string without causing damage to the string.