decina SANTAI Руководство по установке и эксплуатации - Страница 7

Просмотреть онлайн или скачать pdf Руководство по установке и эксплуатации для Горячая ванна decina SANTAI. decina SANTAI 8 страниц.

Печатать страницу

decina SANTAI Руководство по установке и эксплуатации

TROUBLESHOOTING

PROBLEM

WATER LEAKING FROM AROUND THE

JET BODY

WATER LEAKING FROM THE WATER

PIPES LEADING INTO THE JET BODIES

AND OTHER CONNECTIONS

WATER LEAKING FROM THE SPA JET

BODY

JET FACE IS 'POPPING OUT' FROM THE

ACRYLIC SHELL OF THE BATH/SPA BATH

WATER IS LEAKING FROM THE

WATER PIPE

WATER IS LEAKING NEAR THE SPA

BATH PUMP

PUMP STARTS BUT NO WATER IS

PUMPING FROM THE JETS

PUMP WON'T TURN ON (MANUAL)

TOUCH-PAD NOT WORKING OR WORKING

INTERMITTENTLY

THE PUMP IS NOT TURNING OFF

(ELECTRONIC)

COMMONLY ASKED QUESTIONS

Q: ARE SPA BATHS SAFE?

A: Decina spa baths comply to stringent Australian safety requirements and have multiple, automatic, built-in safety

features that cut-off power for any jet blockages or if no water is present.

Q: HOW MUCH WATER WILL MY BATH / SPA BATH USE?

A: Decina products are economical to run and use minimal water. You must fill your spa bath at least 50mm above the

highest spa bath jets to ensure there is enough water for the spa pump to operate.

Q: WHAT ARE THE ELECTRICAL REQUIREMENTS FOR RUNNING A SPA BATH?

A: Decina spa baths run on a 10 amp standard power supply and are whisper quiet generating only 65 decibels while in use.

Q: WHAT BATH/SPA PRODUTCS CAN I ENJOY IN MY SPA BATH?

A: You can use water soluble bath products designed for spa baths or a small amount of high quality bubble bath. Avoid

using bath oils or oily products (hair conditioners, soaps and emollient skin treatments), as they can cause a build-up in the

pipes, that dirt and grime sticks to, making cleaning difficult.

POTENTIAL CAUSE

- A misalignment between the jet body, locking nut and the bath wall

- A broken seal on the silicone due to movement of the pipe

- Not enough glue applied to the water pipe and inside the jet body

- Pipe not inserted correctly

- Broken glue seal due to movement of pipe i.e. mishandling

A faulty jet body through manufacturing or mishandling

- Faulty jet face/body locking mechanism

- Water pipe overheated or stretched

- Water pipe is cracked

- Misaligned barrel unions or O-rings (supplied) not fitted

- Insufficient water in bath

- Pump installed incorrectly i.e. too high

- Unattached air line

- A split in the air line

- Pump power connection is not switched on

- Air tube not connected to the pump correctly

- Check the touch pad is correctly connected & the cable is not

damaged

- Faulty touch-pad or cable

POTENTIAL REMEDY