KitchenAid 36" Руководство по установке - Страница 12

Просмотреть онлайн или скачать pdf Руководство по установке для Варочная панель KitchenAid 36". KitchenAid 36" 16 страниц. 30” and 36” gas sealed burner glass cooktops
Также для KitchenAid 36": Инструкции по установке (5 страниц)

KitchenAid 36
4. Place burner assembly over spill guard, making sure burner's
rear flange is seated in slot.
5. Check the surface burner and grill flames. Refer to the
"Electronic Ignition System" section.
6. Install the wave tray into the grill. The tab in the left rear
corner of the bay must fit through the slot in the left rear
corner of the wave tray.
A
A. Slot for locating tab
B. Locating tab
7. Place the wave plate on the wave tray. The wave plate must
be centered on the wave tray.
A
A. Wave tray
B. Wave plate
8. Replace grill grate.
12
The griddle is factory installed.
1. Place drip tray in the well at the front of the griddle. Slide tray
toward the back until it stops.
B
2. Clean and season griddle before using. Refer to the Use and
Care Guide that came with your cooktop.
3. Check the surface burner and griddle flames. Refer to the
"Electronic Ignition System" section.
B

Install Griddle

(on some models)
A
B
A. Griddle drip tray
B. Griddle