Centsys Photon SMART Руководство по установке - Страница 6
Просмотреть онлайн или скачать pdf Руководство по установке для Датчики безопасности Centsys Photon SMART. Centsys Photon SMART 8 страниц.
Печатать страницу8. Commissioning the System
1.
Scan the QR Code in Figure 8.
2.
Select the App Store applicable to the operating
system being used, either Apple iStore or Android
Google Play Store.
3.
Download and install the application.
Download on the
App Store
Minimum
Requirements:
• BLE-enabled mobile phone
• iPhone 6s and above
• iOS13
Alternatively, go directly to the app store of the
operating system being used, and search for the app
"MyCentsys Pro". Download and install the application
onto the smartphone.
1.
Once installed, open the application.
2.
From the list of operators, select the operator that
is applicable to this installation.
3.
Connect to the relevant operator.
4.
Tap the three dots at the bottom of the screen,
then enter the settings menu and tap IRBeams.
5.
Choose whether this setup is for Closing IRBeams
or Opening IRBeams. Closing IRBeams, is set to
ON by default.
6.
Tap Photon SMART to begin the configuration.
Tap ADD NEW.
7.
8.
The application will now scan for the Photon
SMART PE beams.
It will then ask to press the button located on the
top left of the receiver PCB, shown in Figure 9.
Push
Button
Get it on
Minimum
Requirements:
• BLE-enabled mobile
phone
• Android 5.0 (Lollipop)
FIGURE 8
FIGURE 9