Green Brook PSPT1G Инструкции по установке - Страница 2

Просмотреть онлайн или скачать pdf Инструкции по установке для Переключатель Green Brook PSPT1G. Green Brook PSPT1G 2 страницы. Ip66 rated weatherproof 7 day fused timer spur switch

Печатать страницу

PROGRAMMING THE

'ON'/OFF' TIMES

1. Press the 'PROG' button and hold for 2 seconds,

after 2 seconds the display will show: (example

shows 7 Day setting

Dia.6)

Note: Only ONE of the following

options can be used at one time.

2. Use the '+' or '-' button to change the day

grouping (PROG) at the top of the display.

This will step through the following programming

options:

7 DAY - MON TUES WED THU FRI SAT SUN

All of them have the same programming.

5 DAY - MON TUE WED THU FRI

Are grouped as one group, and they will all have

the same programming. SAT and SUN will be

programmed individually.

INDIVIDUAL DAY -

Each day will have its program set individually.

MON followed automatically in programming

by each of the other days. To copy times set for an

individual day to another day (e.g. copy Sat set

times to Sun), please see PROGRAM DUPLICATION

below.

3. Once the desired day grouping is selected,

press 'PROG' button to move onto programming

ON/OFF times. Display will show PROG 1 ON, and

the hour digits flashing (24 hour clock) (Dia.7).

(Example shown is for 5 + 1 + 1 + day program)

4. Use the '+' or '-' to set the hours and the 'PROG' to

change between hours and minutes. Followed by

'+' or '-' again to set the minutes. Press 'PROG' to

change to program OFF time.

(Dia.8)

5. Use the '+' or '-' to set the OFF time in the same

way as for PROG 1 ON time.

6. Press 'PROG' to scroll through program 2 ON,

program 2 OFF, program 3 ON, program 3 OFF,

program 4 ON, program 4 OFF, adding in times

as required. If you wish to omit programmes just

leave dashes in that ON/OFF location. Press

'PROG' to move to the next linked day (SAT

follows the 5 day group automatically) (Dia.9).

7. Set ON/OFF times as before. Press 'PROG' to

move to the next linked day (SUN follows the

SAT automatically) (Dia.10).

8. Set ON/OFF times as before.

9. Once program 4 OFF has been set, press 'PROG'

to exit program mode and return to operating

mode.

PROGRAM DUPLICATION

There are two copy functions: copy one day to

another, or copy one day to all other days. When

programming for 'Individual Day' or '5 Day' you can

copy the programmed data from one day to another

day.

1. When setting ON time of 'PROG' 1, press 'TIME'

button and then use '+' or '-' to select the day you

want to copy.

2. Press 'TIME' button twice to copy the data of the

selected day to current day. Or press 'TIME' button

for 2 seconds to copy the data of the selected day

to the following days.

(Example shown for copying data TUE to THU)

When the ON/OFF times for WED are set, the display

will show 'THU':- (Dia.11).

3. Press 'TIME' button then the icon 'MON' will be

flashing (Dia.12).

4. Use '+' or '-' button to select 'TUE', then press 'TIME'

button twice to copy the data. The display will

show: (Dia.13).

Dia.5

Dia.6

Dia.7

Dia.8

Dia.9

Dia.10

Dia.11

Dia.12

Dia.13

MODIFYING OR ADDING

NEW PROGRAMMES

1. Press 'PROG' button and hold for approx 2

seconds, the display will show: (Dia.14).

2. Use '+' or '-' button to select the day grouping

which requires modifying or a new day grouping

for a new programme.

3. For modification press 'PROG' repeatedly to

arrive at the programme time requiring

modification then use '+' or '-' button to make

the change. Press 'PROG' repeatedly again to

arrive at the next time requiring modification

and use '+' or '-' button to make the change.

OPERATING MODE

Operating mode needs to be set to allow programmed

times to function

To set timer status -

1. Use '+' button to set the output mode.

ON -

Output to permanently ON and omit the

program (Dia.15).

OFF -

Output to permanently OFF and omit the

program (Dia.16).

ON AUTO - Output to ON until next program OFF

period (Dia.17).

AUTO OFF - Output to OFF until next program ON

period (Dia.18).

(Note - When in program mode display will always show AUTO)

ONE AND TWO HOUR BOOST

1. Pressing '-' (Boost) once in normal

operating mode turns on for 1 hour period

(Dia.19).

2. Pressing '-' (Boost) twice turns output on for a 2

hour period (Dia.20).

3. Pressing '-' (Boost) button three times cancels the

(Boost) ON period (Dia.21).

Dia.18

Dia.20

SUMMER MODE

1. In operating mode, pressing the 'PROG' and

'TIME' (combination of buttons) to set the

summer mode. The clock will forward on one

hour (showing the icon

Dia.22).

(Example: the clock will change to '11.00', if the

time is '10.00' now press "PROG' and 'TIME'.)

Note: Pressing the 'PROG' and 'TIME' (combinations of buttons) to exit the summer mode.

T2 5

13A Fuse

Supply

Battery Back up / Life

Note: Battery is fully charged after 14.5 hours.

The non-replaceable, fully charged battery, will retain any program information for a

period of 700 hours should their be power loss or the unit switched off with the double

pole isolation switch.

Display is not visible during this period unless a button is pressed.

Dia.14

Dia.15

Dia.16

Dia.17

Dia.19

Dia.21

Dia.22

Wiring Diagram

TIMER

Isolation Switch

Load