Centurion D10 Руководство по установке - Страница 4

Просмотреть онлайн или скачать pdf Руководство по установке для Открыватель ворот Centurion D10. Centurion D10 12 страниц. Industrial sliding gate operators
Также для Centurion D10: Руководство по конфигурации (13 страниц), Руководство по установке (12 страниц), Краткое руководство по эксплуатации (8 страниц)

Печатать страницу

 Closing Safety Beams, which will prevent the gate from moving

should anyone be in the path of the gate while closing

 Passive Sensitive Edge to help absorb the kinetic energy of the

gate in the event of a collision and provide additional time for the

inherent electronic anti-crushing technology of the operator to

react. Must be installed on all shearing edges

Additionally, the IRBOC feature must be invoked on the

controller so that the gate will immediately reverse direction,

in the event of a collision, regardless of whether it is

commencing with the opening or closing cycle

8. Lubrication

Do not attempt to run the operator without first filling the

gearbox with lubricant

In order to prevent possible leakage during shipping, the unit is

shipped with no oil inside the gearbox. A bottle containing 80ml of a

special synthetic oil is included with the product, and this must be

introduced before operating the product.

Oil filling

procedure

It is more convenient to

introduce oil before

bolting the unit down, as

shown in the illustration

below. The D10/

D10 Turbo does not

require routine oil

changes. However, in the

event of the unit losing oil

due to stripping down or

mechanical damage, the

correct replacement oil is

Castrol SAF XO 75W-90

synthetic final drive

lubricant

 Remove dipstick from gearbox

 Cut the tip off the nozzle which will allow for the oil to pass

through the nozzle; unscrew the oil bottle cap; remove the

seal from beneath the oil bottle cap; replace the oil bottle

cap onto the bottle and attach the extension tube to the

nozzle

 Fill the gearbox with the oil provided

9. Cabling Requirements

Legend

90V-240V AC mains cable via double pole mains isolator switch

(3 core LNE 1.5mm SWA)

Optional wiring (all cable is multi-stranded):

Intercom cable from motor to dwelling

Intercom cable from motor to entry panel

Safe Close and

Beams

Safe Open:

Safety Beams

(3 core 0.5mm )

Closing

Safety Beams

Oil specifications

CENTURION product code:

OIL80ML0X0/H

Castrol SAF-XO 75w-90 Synthetic Final

Drive Lubricant

(n1 + 6 core 0 .5mm )

(n2 0.5mm )

Recommended infrared Safety

Passive

sensitive

edge

Opening