Deckma Hamburg FMS3000 Руководство по установке - Страница 7

Просмотреть онлайн или скачать pdf Руководство по установке для Система безопасности Deckma Hamburg FMS3000. Deckma Hamburg FMS3000 13 страниц. Fire alarm system

Печатать страницу
Technical documentation
2.3.

Guideline for the installation of sensors and bases or fire detectors

Make sure that fire detectors are installed according to the applicable building
−
regulations and standards.
Sensor and base combinations should only be installed where:
−
Only install fire detectors in suitable environments.
−
The following environments should be avoided:
−
Do not use high-voltage testers on the sensor or the base.
−
Certain actions can lead to permanent damage to the sensor:
−
2.4.

Testing the fire detectors

If damage to a fire detector is suspected, it is to be replaced.
−
After installation, all fire detectors in the fire alarm system are to be tested to ensure
−
that all function correctly.
Installation and maintenance should only be carried out by appropriately trained
−
specialist personnel.
Do not test the function of fire detectors with a flame or open fire.
−
Functional tests should be performed with appropriately configured sensor test devices
−
in order to be able to determine correct functioning.
Maintenance must be carried out after a testing period specified by the regulations of
−
the person responsible for the fire detector system.
If no such regulations are available, we recommend annual testing. In this case, the
−
following tests are to be included:
Sensors are delivered with a dust protection cover to keep out dirt during installation.
−
This is only to be removed after installation!
Tel.: +49 (0)4105 / 65 60 – 0 *
Installation Instructions
the ambient temperature is between -10°C and +50°C.
o
the condensation and humidity values are between 10% and 95% RH – non-
o
condensing (at 40°C).
Situations, in which there is heavy condensation.
o
Situations, in which aggressive gases are present.
o
Situations, in which dust or steam is present.
o
Situations, in which obstructions could hinder the flow of air to the fire detectors.
o
Areas at risk of explosion.
o
Dismantling the housing.
o
Impacts or shocks.
o
a visual check for dirt and mechanical damage to the fire detector.
o
a normal function test with smoke detector and/or heat detector test devices.
o
DECKMA GmbH
Email:
201309IA
* Fax: +49 (0)4105 / 65 60 – 25
www.deckma-gmbh.de
* Internet:
Version 0.2
27/09/2016
FMS3000
page 7 of 13