Centurion D5-EVO REPAIR Руководство по конфигурации - Страница 3
Просмотреть онлайн или скачать pdf Руководство по конфигурации для Открыватель ворот Centurion D5-EVO REPAIR. Centurion D5-EVO REPAIR 13 страниц. Sliding gate operator
Также для Centurion D5-EVO REPAIR: Руководство по установке (14 страниц), Руководство по программированию (4 страниц)
Печатать страницу
The schedule of Factory Defaults are detailed in the full
installation manual, available for download on
www.centsys.co.za
Icon
1.
Setting limits
2.
Safety
2.1. Collision force
2.2. Collision count
2.3. Alarm output
2.4. LCK input as ESTOP
2.5. External gate
indication status
3.
Autoclose
3.1. Autoclose Status
3.2. Autoclose Timer
3.3. Autoclose Override
3.4. Autoclose advanced
options
4.
Modes of operation
4.1. Operating mode
5.
Run profile
5.1. Positive Close Mode
5.2. Pre-open delay
5.3. Pre-close delay
5.4 Opening speed
5.5. Closing speed
5.6. Ramp-up distance
5.7. Ramp-down distance
5.8. TRG stop distance
5.9. IRB stop distance
5.10.Crawl distance
5.11.Torque limit
Menu
Sub-menu
1.1. Setup wizard
2.1.1. Opening collision force
2.1.2. Closing collision force
2.5.1. Indicator output
2.5.2. Closed indication
2.5.3. Part close indication
2.5.4. Closing indication
2.5.5. Part open indication
2.5.6. Opening indication
2.6.7. Open indication
2.5.8. Pedestrian indication
2.5.9. Unknown indication
3.4.1. Autoclose fully open
3.4.2. Autoclose partly open
3.4.3. Autoclose partly closed
4.1.1. Standard Mode
4.1.2. Condominium Mode
4.1.3. Reversing Mode
4.1.4. PLC
4.1.5. Deadman Control Mode
5.1.1. Positive Close Mode Status
5.1.2. Positive Close Mode Force