Airflow iCON Руководство по установке и эксплуатации - Страница 2

Просмотреть онлайн или скачать pdf Руководство по установке и эксплуатации для Вентилятор Airflow iCON. Airflow iCON 9 страниц. Domestic dc fans

iCON Domestic DC Fans – 15S & 30S

Installation, Maintenance and Use

iCON Domestic DC Fans are available in 2 model sizes and can be fitted into a wall or ceiling.

Each fan requires a suitable size hole through the wall or ceiling which connects into a duct

venting to the outside. The external opening should be covered by a suitable external grill,

available separately from Airflow Developments Ltd.

72683701 - 15S -100mm Axial Fan with maximum capacity of 21.9 l/sec.

72683801 - 30S -100mm Mixed Flow Fan with maximum capacity of 34.25 l/sec

iCON Domestic DC Fans can be used as a simple extract fan powered via the SELV power

supply unit (supplied), and connected to either a remote switch, or can be fitted with an

internal control module, supplied to give a range of control options including timer,

humidity, motion sensor, pull cord, trickle speed or a combination of these functions.

Optional control modules are available separately and can be fitted at the time of

installation or retrofitted.

iCON Domestic DC Fans have IPX 4 rated housings, they are double-insulated and are

suitable for fitting in Zone 1 or 2 of bathrooms, toilets, kitchens, utility rooms and inside

shower cubicles as defined in Section 701 BS7161:2008 (IEEE Wiring Regulations, 17

Edition ). They also comply with the 2010 Building Regulations, Approved Document F. The

power supply unit, supplied with the fan, must be fitted outside of Zones 0, 1 and 2. It is

usually installed outside the room.

Do not place the fan near direct heat sources, e.g. radiant

heaters,

or where temperatures

can exceed 40°C (104°F).

Page 2 of 8