Centurion F40/1 Руководство по эксплуатации - Страница 15

Просмотреть онлайн или скачать pdf Руководство по эксплуатации для Вентилятор Centurion F40/1. Centurion F40/1 20 страниц. With floor stand

INSTALLATION

Cross-bar Feet

1. Loosen and remove the four screws from the bars.

2. Cross the two bars. Make sure you align the four holes on the

bars to the four holes on the flange. At the same time align the

hole on the flange with the extra hole on the top bar.

3. Tighten the four screws and insert the base cap down over the

feet.

Control Panel (Speed Control Switch)

Caution! Never remove the inner pipe stopper. If you remove the

inner pipe stopper service may be necessary. Never loosen the

inner pipe set screw.

1. Loosen the control panel screw by turning it to the left.

2. Now place the hole in the bottom of the control panel over the

inner pipe.

3. Turn the lock screw clockwise and firmly tighten.

English │15