IKEA LAGAN Руководство - Страница 17

Печатать страницу

Setting Weight Ib/Kg

Example: setting weight bJ etween pounds &

kilograms:

1. Touch Clock Settings pad 3 times.

2. Op-3 will display and the START+30

sec needs to be pressed to select.

3. Ib/kg aut o scrolls every 2 seconds

through each selection.

4. Touch START+30 sec pad to

confirm your selection.

NOTES

If the display shows kg, pressing the

will reset the oven controls to lbs. To return to kg,

you will have to again press

then press

Setting Power Save Mode

Example: setting the demo mode on:

Suppose you want to enter Demo mode. When Demo

mode is ON programming functions will work in a rapid

countdown mode with no cooking power.

1. Touch Clock Settings pad 4 times.

2. Op-4 will display a nd the

START+30 sec needs to be pressed

to select.

3. on / oFF auto scrolls every 2

seconds through each selection.

4. Touch START+30 sec pad to

confirm when the display shows on.

Setting Demo Mode

Example: setting the power save mode on:

Turning On power save turns off the time of day

clock display.

1. Touch Clock Settings pad 5 times.

2. Op-5 will display a nd the START+30

sec needs to be pressed to select.

3. on / oFF auto scrolls every 2

seconds through each selection.

4. Touch START+30 sec pad to

confirm the LED shows no.

NOTES

START

When

is pressed and the previous setting was

+30 Sec

OFF then it will be set to ON. If you want to turn the

demo mode back OFF you will have to again press

Clock

seven times and then

Settings

button

three times and

START

press

+30 Sec

CLEANING AND CARE

Disconnect the power cord or leave the door open

to deactivate the oven during cleaning. Disconnect

the power cord before replacing filters and lights.

EXTERIOR

The outside surface is precoated steel and plastic. Clean

the outside with mild soap and water; rinse and dry

with a soft cloth. Do not use any type of household or

abrasive cleaner.

DOOR

Wipe the window on both sides with a soft cloth to

remove any spills or spatters. Metal parts will be easier

to maintain if wiped frequently with a soft cloth. Avoid

the use of spray and other harsh cleaners as they may

stain, streak or dull the door surface.

STAINLESS STEEL

BLACK STAINLESS

STEEL(SOME MODELS)

Your microwave oven(some models) may have a

Stainless Steel finish or coating. Clean the stainless

with warm soapy water using a clean sponge or cloth.

Rinse with clean water and dry with a soft clean cloth.

DO NOT use ANY store bought cleaners like Stainless

Steel cleaners or any other types of cleaners containing

any abrasive, chlorides, chlorines or ammonia. It is

recommended to use mild dish soap and water or a

50/50 solution of water and vinegar.

TOUCH CONTROL PANEL

Care should be taken in cleaning the touch control

panel. If the control panel becomes soiled, open the

microwave oven door before cleaning. Wipe the panel

with a cloth dampened slightly with water only. Dry with

a soft cloth. Do not scrub or use any sort of chemical

cleaners. Close door and touch STOP/CLEAR

INTERIOR

Cleaning is easy because little heat is generated to

the interior surfaces. To clean the interior surfaces,

wipe with a soft cloth and warm water. DO NOT USE

ABRASIVE OR HARSH CLEANERS OR SCOURING PADS.

For heavier soil, use baking soda or a mild soap; rinse

thoroughly with hot water. The round wire rack and

shelf can be cleaned with hot soapy water, rinsed and

dried.

WAVEGUIDE COVER

The waveguide cover is located on the right side in the

microwave oven cavity. It is made from mica so requires

special care. Keep the waveguide cover clean to assure

good microwave oven performance. Carefully wipe with

a damp cloth any food spatters from the surface of the

cover immediately after they occur. Built-up splashes

may overheat and cause smoke or possibly catch fire.

DO NOT REMOVE THE WAVEGUIDE COVER.