Green Energy GECI Руководство пользователя - Страница 9
Просмотреть онлайн или скачать pdf Руководство пользователя для Зарядное устройство Green Energy GECI. Green Energy GECI 15 страниц. Black diamond charger
Печатать страницу
The Black Diamond Charger performs an exclusive charge cycle that is composed
by stages at constant current and stages at pulsed current, with cool down pauses
in between. The management of the charging curve is totally automatic.
Depending on the programming of the Full Charge time window (Parameter 9), when
the battery approaches the gassing voltage the charger may suspend the charge
(typical opportunity charge cycle). In this situation, the display visualizes the message:
Where (hh.mm)A represents the real time at that moment, and (hh.mm)B represents
the beginning of the Full Charge / Overcharge time window.
During the cool down pauses, that are normally inserted during the gassing phase,
the display visualizes the message "Cooling".
EMERGENCY STOP
If the battery doesn't reach the gassing voltage within a predetermined time, the
charger will suspend the charge, and it will visualize the message:
In this case, the charge cannot proceed, and it's necessary to disconnect the battery.
It's recommended to control the battery for damaged cells.
AC INPUT BLACK OUT
If there is a black-out of the AC input, while the charge is in progress, the charger
will shut down, while the charge parameters will remain in memory.
When the AC input will be recovered, the charger will restart the charge cycle
automatically, and the display will show the message:
OVERCURRENT PROTECTION
If the AC input voltage is abnormally high and/or the AC input adjustments have not
been done correctly (See Chapter "INSTALLATION"), the charging current may
reach an excessive value.
In this case, the charger will suspend the charge, and the display will visualize
the message:
The charge will not proceed, and it's necessary to disconnect the battery.
It's recommended to control the AC input connections of the charger,
as explained in Chapter 3 "INSTALLATION".
It's recommended to verify the condition of the battery, as it may have one or more cells in short circuit.
AUTOMATIC STOP
The charger shuts down automatically when the charge is correctly complete, and
it will visualize the message:
At this time it's possible to disconnect the battery.
EQUALIZE CYCLE – AUTOMATIC (CLOCK MODE)
At the end of the charge, if the battery is left connected to the charger for a sufficient time, the charger activates the
Equalize cycle automatically, based upon the programmed schedule.
If the charge cycle ends outside of the programmed Equalize time window, the charger
remains in stand-by mode, and the display shows the message:
Where DAY and TIME represent the beginning of the programmed Equalize time window.
EQUALIZE CYCLE – MANUAL
During the charging of the battery the operator can scroll the menu of the display, and
he can force a EQ manual cycle at the end of this cycle.
at constant current and stages at pulsed current, with cool down pauses in b
Depending on the programming of the Full Charge time window (Parameter
The management of the charging curve is totally automatic.
battery approaches the gassing voltage the charger may suspend the charg
opportunity charge cycle). In this situation, the display visualizes the messag
(hh.mm)A →
Depending on the programming of the Full Charge time window (Parameter
battery approaches the gassing voltage the charger may suspend the charg
opportunity charge cycle). In this situation, the display visualizes the messag
Where (hh.mm)A represents the real time at that moment, and (hh.mm)B re
beginning of the Full Charge / Overcharge time window.
(hh.mm)A →
During the cool down pauses, that are normally inserted during the gassing
(hh.mm)A →
display visualizes the message "Cooling".
Where (hh.mm)A represents the real time at that moment, and (hh.mm)B re
beginning of the Full Charge / Overcharge time window.
Where (hh.mm)A represents the real time at that moment, and (hh.mm)B re
During the cool down pauses, that are normally inserted during the gassing
beginning of the Full Charge / Overcharge time window.
display visualizes the message "Cooling".
During the cool down pauses, that are normally inserted during the gassing
display visualizes the message "Cooling".
EMERGENCY STOP
If the battery doesn't reach the gassing voltage within a predetermined time
suspend the charge, and it will visualize the message
EMERGENCY STOP
AC INPUT BLACK OUT
EMERGENCY STOP
If the battery doesn't reach the gassing voltage within a predetermined time
If there is a black-out of the AC input, while the charge is in progress, the
suspend the charge, and it will visualize the message
down, while the charge parameters will remain in memory.
AC INPUT BLACK OUT
If the battery doesn't reach the gassing voltage within a predetermined time
AC INPUT BLACK OUT
In this case, the charge cannot proceed, and it's necessary to disconnect th
When the AC input will be recovered, the charger will restart the charge cy
suspend the charge, and it will visualize the message
If there is a black-out of the AC input, while the charge is in progress, the
It's recommended to control the battery for damaged cells.
and the display will show the message:
down, while the charge parameters will remain in memory.
If there is a black-out of the AC input, while the charge is in progress, the
down, while the charge parameters will remain in memory.
When the AC input will be recovered, the charger will restart the charge cy
In this case, the charge cannot proceed, and it's necessary to disconnect th
and the display will show the message:
When the AC input will be recovered, the charger will restart the charge cy
It's recommended to control the battery for damaged cells.
and the display will show the message:
In this case, the charge cannot proceed, and it's necessary to disconnect th
OVERCURRENT PROTECTION
It's recommended to control the battery for damaged cells.
If the AC input voltage is abnormally high and/or the AC input adjustmen
done correctly (See Chapter "INSTALLATION"), the charging curren
OVERCURRENT PROTECTION
excessive value.
OVERCURRENT PROTECTION
If the AC input voltage is abnormally high and/or the AC input adjustmen
In this case, the charger will suspend the charge, and the display will visuali
done correctly (See Chapter "INSTALLATION"), the charging curren
If the AC input voltage is abnormally high and/or the AC input adjustmen
excessive value.
done correctly (See Chapter "INSTALLATION"), the charging curren
excessive value.
In this case, the charger will suspend the charge, and the display will visuali
In this case, the charger will suspend the charge, and the display will visuali
The charge will not proceed, and it's necessary to disconnect the battery.
It's recommended to control the AC input connections of the charger,
Chapter 3 "INSTALLATION".
It's recommended to verify the condition of the battery, as it may have one
The charge will not proceed, and it's necessary to disconnect the battery.
short circuit.
It's recommended to control the AC input connections of the charger,
The charge will not proceed, and it's necessary to disconnect the battery.
Chapter 3 "INSTALLATION".
It's recommended to control the AC input connections of the charger,
It's recommended to verify the condition of the battery, as it may have one
AUTOMATIC STOP
DES AUFLADEN
Chapter 3 "INSTALLATION".
short circuit.
It's recommended to verify the condition of the battery, as it may have one
The charger shuts down automatically when the charge is correctly com
short circuit.
EQUALIZE CYCLE – AUTOMATIC (clock mode)
visualize the message:
AUTOMATIC STOP
DES AUFLADEN
At the end of the charge, if the battery is left connected to the charger fo
AUTOMATIC STOP
DES AUFLADEN
The charger shuts down automatically when the charge is correctly com
the charger activates the Equalize cycle automatically, based upon
visualize the message:
EQUALIZE CYCLE – AUTOMATIC (clock mode)
schedule.
The charger shuts down automatically when the charge is correctly com
visualize the message:
If the charge cycle ends outside of the programmed Equalize time win
At the end of the charge, if the battery is left connected to the charger fo
remains in stand-by mode, and the display shows the message:
the charger activates the Equalize cycle automatically, based upon
schedule.
At this time it's possible to disconnect the battery.
If the charge cycle ends outside of the programmed Equalize time win
remains in stand-by mode, and the display shows the message:
At this time it's possible to disconnect the battery.
At this time it's possible to disconnect the battery.
Where DAY and TIME represent the beginning of the programmed Equalize
EQUALIZE CYCLE – MANUAL
Where DAY and TIME represent the beginning of the programmed Equalize
During the charging of the battery the operator can scroll the menu of the di
force a EQ manual cycle at the end of this cycle.
EQUALIZE CYCLE – MANUAL
During the charging of the battery the operator can scroll the menu of the di
force a EQ manual cycle at the end of this cycle.
DELAYED OVERCH.
(hh.mm)B
DELAYED OVERCH.
(hh.mm)B
DELAYED OVERCH.
(hh.mm)B
xx.x V
Cooling
xxx Ah
x.x t
xx.x V
Cooling
xxx Ah
x.x t
[V.140 – January 2011]
xx.x V
Cooling
xxx Ah
x.x t
[V.140 – January 2011]
EMERGENCY STOP
[V.140 – January 2011]
VGAS NOT REACHED
EMERGENCY STOP
VGAS NOT REACHED
EMERGENCY STOP
RESTART AFTER
VGAS NOT REACHED
POWER SUPPLY OFF
RESTART AFTER
POWER SUPPLY OFF
RESTART AFTER
Page 17/28
POWER SUPPLY OFF
Page 17/28
Page 17/28
CURRENT
TOO HIGH
CURRENT
TOO HIGH
CURRENT
TOO HIGH
[V.140 – January 2011]
[V.140 – January 2011]
CHARGE
COMPLETE
CHARGE
COMPLETE
CHARGE
COMPLETE
DELAYED EQUALIZE
DAY
TIME
DELAYED EQUALIZE
DAY
TIME
Page 18/28
Page 18/28
Page 18/28
FORCE MANAUL EQ
ENABLED
FORCE MANAUL EQ
IBCI B
IBCI B
IBCI B
IBCI B
IBCI B