MAJORITY D40 Руководство - Страница 5

Просмотреть онлайн или скачать pdf Руководство для Стереосистема MAJORITY D40. MAJORITY D40 7 страниц.
Также для MAJORITY D40: Руководство пользователя (20 страниц)

Печатать страницу

In Bluetooth, SD, or USB mode, use the 'Left' and 'Right' (Ref.20)/(Ref.27) buttons on the remote control or

press and hold the 'Previous' and 'Next' (Ref.4)/(Ref.5) buttons on the unit to skip tracks and rewind or fast

forward. In Optical or AUX mode, use the native controls on your audio device to skip, rewind or fast forward.

Switching Mode

When a USB, SD card or AUX cable is inserted, the unit will automatically switch to the correct mode and

begin playing audio. If however you need to select the mode manual, select the correct mode using the 'Mode'

button (Ref.24)/(Ref.3).

On the speaker set, Bluetooth and USB modes are indicated by a blue light. All other modes are indicated by a

red light (Ref.7).

AUX and Optical Modes

Use the 3.5mm to 3.5mm AUX cable or 3.5mm to RCA cable to connect an external AUX device to the 'AUX'

input of the D40 speakers (Ref.15).

AUX Mode

When an AUX cable is plugged into the AUX port at the rear of the speaker (Ref.15), the unit will automatically

switch to AUX mode (indicated with a red light (Ref.7)) and you will hear the words 'Line in' from the

speakers. If necessary, select 'AUX' mode using the 'Mode' button (Ref.24)/(Ref.3).

Optical Mode

To connect the D40 speakers to an external device, use an optical cable to connect via the OPTICAL input

(Ref.10).

Press the 'Mode' button (Ref.24)/(Ref.3) to switch the Mode to Optical. The corresponding mode indicator

light (Ref.7) will light up red and you will hear the word 'Optical' from the speakers when Optical mode is

selected.

Bluetooth Mode

To connect an external device to the D40 speakers, ensure that the speakers are in 'Bluetooth' mode. Select

'Bluetooth' mode manually by using the 'Mode' button (Ref.24)/(Ref.3) until the corresponding mode indicator

light, labelled 'AUX/BT', (Ref.7) lights up blue. You will hear the word 'Bluetooth' to indicate that Bluetooth

mode is now active.

Switch Bluetooth on for your external device. Select 'D40' from the list of devices.

When your external device is connected, you will hear the words 'Bluetooth Connected' to indicate a

successful connection. You can now play audio through the speakers. When Bluetooth is disconnected, you

will hear the words 'Bluetooth Disconnected' to indicate successful disconnection.

USB & SD Card Mode

USB

To use USB mode, insert a USB drive into the USB port at the back of the speaker (Ref.13). You will hear the

word 'USB' from the speakers indicating that USB mode is active, and the 'USB/OPT' mode indicator light

(Ref.7) will light up blue. If necessary, select 'USB' mode using the 'Mode' button (Ref.24)/(Ref.3).

To use SD mode, insert a SD/TF card into the SD port at the back of the speaker (Ref.14). You will hear the

words 'Memory card' come from the speakers, indicating that SD card mode is active, and the 'SD' mode

indicator light (Ref.7) will light up red. If necessary, select 'SD' mode using the 'Mode' button (Ref.24)/(Ref.3).