IKEA HC-705WEN Руководство по эксплуатации - Страница 11
Просмотреть онлайн или скачать pdf Руководство по эксплуатации для Холодильник IKEA HC-705WEN. IKEA HC-705WEN 20 страниц. French door
Печатать страницу
Fast-cooling mode
Entry: push the key 3, the icon 8 turns
on. Choose the quick cooling mode to
operate the refrigerator. If the refrigerator
is operating in the energy saving mode, the
energy saving mode exits.
Exit:
enter the energy saving mode
push the key 2 or 4 to the set temperature
push the key 3. When each condition
mentioned above occurs, the refrigeratory
exits the quick cooling mode.
Fast-freezing mode
Entry: push and hold the key 3 for 3
seconds, the icon 9 turns on. Choose the
quick-freeze mode to operate the freezer. If
the freezer is operating in the energy-saving
mode, the energy-saving mode exits. Exit:
enter the energy-saving mode
key 2 or 4
push and hold the key 3 for 3
seconds. When each condition mentioned
above occurs, the quick-freeze mode exits.
To set the temperature of the
refrigerator compartment
Push the key 1until the display changes to
refrigerator temperature setting. The icon
124 turns on. Push the key 2 or 4 once, and
the refrigerator setting temperature changes
1°C according to the regulation of "(8)- (2)
-(8)".
To set the temperature of the freezer
compartment
Push the key 1 until the display changes to
the freezer temperature setting. The icon
turns on. Push the key 2 or 4 once, and the
freezer setting temperature changes 1°C
according to the regulation of "(-15)- (-24)-
(-15)".
Backlight action
When the refrigerator/ freezer door is open
or any button is pressed,the Function Display
Screen will become illuminated.If no button
is pressed and the refrigerator/freezer door
has remained open for 30 seconds,the
Function Display will turn off.
FIRST USE
Cleaning the interior
Before using the appliance for the fi rst time,
wash the interior and all internal accessories
with lukewarm water and same neutral soap
so as to remove the typical smell of a brand-
new product, then dry thoroughly.
Connecting Your refrigerator to the
power supply
Your refrigerator will enter the ex-factory
default state after connecting to the power
supply and it will display target temperature
for the refrigerator compartment and freezer
compartment.
Work modes of Your refrigerator
push the
You can set your refrigerator in either of the
following two ways:
Auto mode
We suggest you choosing this mode if
you have no special requirements. Your
refrigerator will work automatically after you
chose this mode.
Manual mode
You can set the temperature by pressing
the temperature adjustment key. Please see
previous chapter.
Important! Do not use detergents or
abrasive powders, as these will damage the
finish.
You ought to get a good knowledge of all
safety precautions and make sure that your
refrigerator has been placed properly in its
final position before using.
Refrigerator compartment
Though the temperature-adjustable
device could keep most of the refrigerator
compartment at an average temperature
around 2~8°C, it fails to preserve the
freshness of food for long. As a result, the
refrigerator compartment can be used only
for shortterm storage.
11