decon Liberty LBM7113 Инструкция по сборке Руководство - Страница 7
Просмотреть онлайн или скачать pdf Инструкция по сборке Руководство для Инвалидное кресло decon Liberty LBM7113. decon Liberty LBM7113 9 страниц. Mounting set etac cross 6 / cross 6 long
Печатать страницу__________________________________________________________________________________
WARNING!
The screws holding the clamps (C)
shall be tightened to 7-9Nm of
torque.
Alt.2
Using the adjustment tool that is included in the
delivery of Liberty (not this mounting set), set the
angle of the adaptorbar. Only mount the inner pipe on
one side and then rotate the center pipe to the correct
angle. Now mount the other inne pipe in the same
position/angle as the first one. Check that the center
pipe is centered in the wheelchair. Now tighten the
screws in the clamps (C).
WARNING!
The screws holding the clamps (C)
shall be tightened to 7-9Nm of
torque.
__________________________________________________________________________________
Sida 7/9
Mounting set
LBM7013, LBM7113, LBM7213