KitchenAid KECX260 Руководство по установке - Страница 3
Просмотреть онлайн или скачать pdf Руководство по установке для Варочная панель KitchenAid KECX260. KitchenAid KECX260 6 страниц. Electric built-in cooktops
Печатать страницу
SECTION B -
CABINET CONSTRUtXION
\
All surface units are designed for installation in a base cabinet with a countertop depth of 24". For information on top
cabinet location see notes below.
Countertop cutout dimensions are given in Figure 2 and the chart below for the various cooktop models. When the il-
lustration is followed the required clearances from the front edge of countertop and the nearest vertical and rear walls
will be obtained.
~belimi~theriskdbumsorfirebyreaching~theheated
surface units, cabinet storage space located above the surface unit
should be atided.
li cabinet storage is to be provided, the risk can
be reduced by installing a range heed that ptojects horizontally a
minimum of 5 inches w
the bottom of the cabinets.
NOTE: "A" = 30" min. dearance beIwen the top of the cooking sur-
face and the bottom of an unprotected v.ood or melal cabinet
"A" = 24" min. when bottom of wcxxl or metal cabinet is protected
by nd less than %" flame retardant millboard covered with not less
than No. 28 MSG sheet steel, OM4" aluminum, O.Ol5" stainless steel
or QO20" copper.
NOTE: Sides of cooktop must be spaced a minimum of one inch from
any vertical surface.
TOP CABINET
COUNTERTOP
CABINET
CUTOUT
DIMENSIONS
FOR
NJ&
INSTALLATION
INFORMATION
30" MODELS
36" MODELS
"B" DIMENSION
27"
W/i"
Figure 2
SECTION C -
UNPACK UNIT
Remove all packing material from unit and any accessories.
*GRILL
PLUG IN
ELEMENT
Grill/Griddle Models - Assemble grill/griddle as shown in Figure
3. Set aside.
Remove both front electric elements by raising slightly and pull-
ing directly away from receptacle. Remove the two front drip
bowls. Set aside.
When raising or lowering the cc&top
itself use the front two
element openings.
KECG260, KECX260, ESUG-360
Figure 3
-3-