decon IN0120 Инструкция по сборке - Страница 5

Просмотреть онлайн или скачать pdf Инструкция по сборке для Аксессуары для фотоаппаратов decon IN0120. decon IN0120 8 страниц. Simplex

Mounting

1. Mount the equipment on the current chair. Check that the bubble in the spirit level is

centered, this indicates correct angle and is a prerequisite for the control handle to

function satisfactorily.

2. Now it is time to mount the Simplex control handle in the attachment.

a. Start by removing the four M6 nuts and washers.

b. Slide the control cable down through the hole in the plate.

c. Position the handle, mount the four nuts and washers and tighten these.

d. Fix the control cable with cable ties as shown. Check the correct length and

that the cable will not get caught when the handle is folded up / down.

As an option we have IN0121 where the two screws for locking the clamps are replaced with

cam levers. This enables toolless mounting and disassembly which can be advantageous on

foldable wheelchairs etc. IN0121 is ordered separately.

2020-06-23

5(8)