Green image GC-2103DMX-DIN Руководство - Страница 2
Просмотреть онлайн или скачать pdf Руководство для Медиаконвертер Green image GC-2103DMX-DIN. Green image GC-2103DMX-DIN 4 страницы. Dmx512 decoder (with stand-alone)
Печатать страницуWiring Diagram
Using Instruction
Operation of switching 3 or 4 channels
Use the following buttons to set desired DMX512 address: "1" sets
"hundredths" position, "2" sets "tenths" position, "3" sets "ones".
Ensure a stable connection for the DMX512 controller to work properly.
Choose Channel
Press 2
and 3
button at the same time for 2 seconds, digital display
nd
rd
will flash cH, then press 1
st
to how many desired channels (3 creates 3 channels, and so on). Press
and hold any button for >2 seconds to confirm 1,2,3 or 4 channels.
The factory preset default is 4 channel outputs.
Set DMX address
Press 1
button for 2 seconds, digital display flashes to set the required
st
DMX address, then press any button for >2 seconds to confirm.
Choose PWM frequency
Press and hold 1
and 3
button for 2 secs, digital display will flash to
st
rd
show P_c. P means PWM frequency. To change, press the 1
display reads "1", it is at 1500Hz, "2" is at 200Hz. C means dimming
options. To change, press the 3
logarithmic dimming, "2" uses linear dimming.
The preset default is PWM frequency 200Hz with linear dimming (2_2).
greenimagetech.com
105 8288 N Fraser Way
Burnaby BC, V3N 0E9
button to choose 1/2/3/4, each corresponds
button. If display reads "1", it is using
rd
T: (604) 207-9879
F: (604) 207-6992
button. If
st
© Green Image Tech, LTD. All rights reserved. We reserve the right to change design, materials
and finish in any way that will not alter installed appearance or reduce function and performance.
GC-2103DMX-DIN
DMX512 Decoder
(with Stand-Alone)
"3" button
"2" button
"1" button