Century UK MAX-THRUST RUCKUS Руководство по сборке и эксплуатации - Страница 6

Просмотреть онлайн или скачать pdf Руководство по сборке и эксплуатации для Пульт дистанционного управления Century UK MAX-THRUST RUCKUS. Century UK MAX-THRUST RUCKUS 11 страниц. R/c aerobatic sports aircraft

Печатать страницу

6. Wing Assembly

Locate the 500mm aluminium

wing joining spar and slide

into the round aperture of one

wing panel up to the centre

locating collar. Locate the

small plywood wing locking

plate and insert into the

rectangular aperture behind

the main wing spar, (image G).

Slide the remaining wing panel

onto the exposed portion

of the aluminium spar. The

plywood locking plate will ensure perfect alignment of the two wing halves. Be certain that all

wires are routed correctly via the moulded slots and do not foul the joint between the wing roots.

If desired, a small amount of foam glue can be used for maximum security.

Connect the two black aileron

servo plugs from the wing

to the Y- lead as shown. The

plugs can only be inserted

easily one way round. Make

sure the signal wires match

up (signal is either white or

orange)

The remaining red and black

wires (2 core) from the wing

are for the model's built-

in LED lighting system and

should be connected to the

Y-lead with the black and red

leads.

The 2 Y-leads can then be

threaded through the hole in

the fuselage and plugged in

to the corresponding channels

on your reciever.

Revision V1.0