Decon wheel VH2140 Руководство пользователя - Страница 8
Просмотреть онлайн или скачать pdf Руководство пользователя для Инвалидное кресло Decon wheel VH2140. Decon wheel VH2140 8 страниц.
Печатать страницуGuarantee and maintenance advice
Easywheel is a product which requires little maintenance and if it is maintained in the correct manner then no
problems should arise.
Guarantee
The complete product is guaranteed for a period of two years.
Maintenance advice
The wheel axles are to be wiped clean and oiled with a drop of oil
The spokes should be tightened twice a year.
The screws and bolts should be checked regularly and tightened where necessary (applies to all loose parts)
The frame should be dried with a soft cloth, moistened with cleaning fluid diluted with water.
Check over Easywheel twice a year to ensure that no cracks or any other damage has arisen. If there is any sign of
damage then we ask you to inform Decon Wheel immediately.
All technical servicing shall be undertaken by authorised personnel or Deacon Wheel.
Only original parts or parts which have been approved and fulfil Decon Wheels specifications may be used.
Re-using Easywheel
When Easywheel is to be used by another user then the wheel and nut components are to be removed from the wheelchair. The
nuts are to be cleaned with a gentle cleaning fluid. The tyres and tubing, hand rim and spoke protection are to be removed from
Easywheel, the whole wheel is cleaned using a gentle cleaning solution. It is then given a function-test. If the wheel jams then
it should be sent in for inspection to Deacon Wheel or to a referred service partner. The QR axle is to be checked and tested.
The hand rim and spoke protection are to be fitted, or changed if they show signs of heavy wear and tear, and new tyres are to
be fitted. It is then to be packed securely and labeled, clearly stating the type of wheelchair the nut components belonged to.
Information about corrosion
All Easywheel's parts are produced from aluminium and stainless steel. Furthermore, all the material surfaces have been
treated and consequently there is no increased risk of corrosion. Nonetheless, after using it, you should always wipe off any
water or damp from the Easywheel fittings with a cloth.
Service and repairs
Easywheel requires minimum maintenance when used normally. For safety reasons, Easywheel should be handed in for checks
every other year, even if you do not experience or notice any perceptible damage or operational problems. When you need a
service or if any maintenance work is required then get in contact with Deacon Wheel or your dealer.
Fault identification on Easywheel
Fault
The hand rim doesn't drive the
wheel forward
Easywheel labours when going
forward
Technical data
Easywheel weight: 4 kg/wheel
Tyre dimension: 20, 22, or 24"
Air pressure: 6 bar, 600 kPa or PU tyre
Chair width extension: approx. 1 cm
Maximum weight capacity: 125 kg (check the wheelchair manufacturer's specifications)
Maximum obstacle clearance: see the wheelchair manufacturer's specifications
Warning!
If these instructions are not adhered to, it may lead to personal
injury or damage to the wheelchair.
Always use anti-tip protection.
Decon Wheel AB
Södra Ekeryd 119
314 93 Hyltebruk
Sweden
Check
Check that the wheel is not
jammed with the adapter
Check that the air pressure is at 6
bar
Action
Ensure that the driver engages with
the adapter and that the wheel can
be pushed in so that it connects
with the adapter
Pump in more air if the pressure is
too low
To order Easywheel and any spare
parts, then get in touch with Decon
Wheel or your dealer.
Manufacture:
Decon Wheel AB
Södra Ekeryd 119
314 93 Hyltebruk
Sverige
Tfn (+46) -345 408 80
www.decon.se
Tel (+46) 345-40880
Fax (+46) 345-40895
www.decon.se
7