Afriso EURO-INDEX Unimes E Руководство по эксплуатации - Страница 12

Просмотреть онлайн или скачать pdf Руководство по эксплуатации для Измерительные приборы Afriso EURO-INDEX Unimes E. Afriso EURO-INDEX Unimes E 20 страниц. Mechanical tank contents gauge with electronic remote indication

Печатать страницу

Mounting and commissioning

6.2

Mounting the wall bracket for the remote indicator

6.3

Adjusting the float

6.4

Adjusting the tank height at the direct indication gauge

Mount the wall bracket to the wall where you want to position

the remote indicator using the enclosed screw (4 x 30 mm) and

a dowel, if required (6 mm).

A free connection G1½ or G2 is available at the tank.

The float wire has three lead seals. Lead seal 1 is located at the end,

lead seal 2 is located 15 cm higher. The moving lead seal 3 is lo-

cated between these two lead seals.

Fig. 2: Float wire

Tank without manhole or flange connection piece

Push the float up to lead seal 2 and press lead seal 3 together

to fixate the float.

Tank with manhole or flange connection piece

Deduct the excess length of the manhole or the flange connec-

tion piece with reference top the wire length from probe 2 to-

wards probe 1.

Mark the point, push the float up to the mark and press lead

seal 3 together to fixate the float

The direct indication gauge is factory-adjusted to the maximum

height which corresponds to a tank height or diameter or 200 cm.

Lead seal 1: fixated

Lead seal 2: fixated

Lead seal 3: moving

Unimes E