Ganz YCX-05 SERIES Руководство по эксплуатации - Страница 4
Просмотреть онлайн или скачать pdf Руководство по эксплуатации для Камера безопасности Ganz YCX-05 SERIES. Ganz YCX-05 SERIES 8 страниц. Ganz ycx-05 series color day/night camera wide dynamic range
Также для Ganz YCX-05 SERIES: Технические характеристики (2 страниц), Руководство по эксплуатации (8 страниц)
Печатать страницу
PART NAMES AND FUNCTIONS
Flange back adjustment wheel
If the focus needs to be adjusted after the
lens has been mounted, loosen the flange
back locking screw ( ) and rotate the adjust-
ment wheel to adjust.
Flange back lock screw
Loosen this screw for flange back adjust-
ment. Be sure to retighten the screw after
adjustment.
Auto-Iris mode switch
For switching the output from the auto-iris
connector ( ).
:
When connecting the auto-iris lens, turn off
the camera power. Also, if the Auto-Iris mode
switch is set to a mode other than "DC" or
"VIDEO" that is set for the connecting lens,
the lens may be damaged.
DC :
To be set when using a non-amp
auto-iris lens.
VIDEO : To be set when using an auto-iris
lens a built-in amp.
Menu Operation Switch
To adjust settings in the OSD menu, press
and hold down the Menu Operation Switch.
The OSD menu appears, and here you can
adjust various settings using this switch.
Menu Operation Switch
• Pressing the switch in the UP/DOWN/
LEFT/RIGHT direction moves the cursor
and allows you to select an item.
• Press the Menu Operation Switch to con-
firm the item you have selected.
* For details, please see the separate "OSD
Operation Manual."
Video iris lens adjustment
While using a video iris lens, make sure to
make this adjustment. Activate the adjust-
ment screen of the video iris lens by selecting
"Setup"
"Lens" in the OSD menu. To adjust
the brightness, turn the "LEVEL" volume
control to "L" or "H" until "LEVEL VR Position:
OK" appears on the OSD screen. When the
adjustment is completed, close the OSD
menu.
* For details, please see "Video-Iris LEVEL
VR Setup" of the separate "OSD Operation
Manual."
:
• Make sure to set the ALC adjustment vol-
ume of the lens to the Average (AV) end.
• Make sure to adjust the lens in a bright
light environment.