Ganz ZC-DN5840NHAT Руководство по эксплуатации - Страница 7
Просмотреть онлайн или скачать pdf Руководство по эксплуатации для Камера безопасности Ganz ZC-DN5840NHAT. Ganz ZC-DN5840NHAT 12 страниц. Mini dome camera
Печатать страницу
Connecting the cables
Connect the power and video cables.
Connect the video cable from the monitor and the coaxial video cable attached to
the camera body.
Connect the video cable from the
monitor here.
Connect the power cable.
●
When using 12V DC, connect the positive (+) terminal to the terminal marked
"+12VDC".
12V DC connection
Attention
Be sure to check that the cables are connected correctly before turning the
●
power on.
Turning on the power when the cables are connected with incorrect polarity
●
may damage the camera.
24V AC connection
Setting the mode setting switch
Attention
Do not alter the position of the mode setting switch marked "FIX" from its
●
factory default setting.
1
FIX
Do not change the switch position from the factory setting.
2
Flickerless (FL)
ON
OFF
3
Backlight
ON
compensation
(BLC)
OFF
4 Synchronization (Sync)
INT.
L.L.
Attention
Setting the flickerless function to "ON" will give a darker picture than when
●
set to "OFF" in low light conditions.
EG-7
Factory default switch settings
Shutter speed to be fixed at 1/100.
Normal position
Set to this position when a strong light is in the back
ground.
Normal position
Internal synchronization mode
Line lock mode (24V AC, 60Hz only)