Avantco 178CPW68HC Руководство пользователя - Страница 4
Просмотреть онлайн или скачать pdf Руководство пользователя для Холодильник Avantco 178CPW68HC. Avantco 178CPW68HC 9 страниц. Ice cream dipping cabinets
Также для Avantco 178CPW68HC: Руководство пользователя (10 страниц)
Печатать страницу
User Manual
Temperature Controls
• Refrigerant LED - Compressor is on
• Fan LED - Fan is on
• Defrost LED - Defrost cycle is running
Functions
Adjusting the Temperature
Your new refrigerator or freezer is already factory-set to run at optimum temperatures for food
safety and should require no adjustments.
Freezers are set to cycle between a minimum temperature of -15°F and a maximum temperature
of -8°F.
Adjusting the temperature changes the minimum temperature your unit will run at. Your unit will not
run constantly at this setting. To change it, follow these instructions:
Digital Control Units
• Hold "SET" for 1 sec. The display will flash the current minimum temperature.
• Use the arrow buttons to adjust the minimum temperature you want it to run at.
• Press "SET" again to save your settings.
Always remember to calculate the differential if you change the minimum temperature setting. The
cabinet temperature will fluctuate up to +7 degrees over your set minimum temperature as the
compressor runs and shuts off. Setting the temperature too high will result in unsafe maximum
temperatures and possible health code violations.
Control
set
- 4 -