Ganz ZC-Y20PH Руководство по эксплуатации - Страница 9

Просмотреть онлайн или скачать pdf Руководство по эксплуатации для Камера безопасности Ganz ZC-Y20PH. Ganz ZC-Y20PH 20 страниц. Colour cs mount camera

Печатать страницу

CAMERA FUNCTION SETTING

The following 8 functions can be set and reset.

Note

Be sure to set the mode switch (for AGC, backlight compensation, ATW, and flickering-reduction operation

settings) to the "(MENU)" position. Failure to do this makes it impossible to set the "shutter speed/flickering-

free operation," "backlight compensation," "AGC/sensitivity levels," and "white balance" from the camera

menu. An iris level, chroma level, image quality (enhancement), and camera ID title can be set from the

camera menu regardless of the mode switch setting.

Functions

(1) Iris level

Adjusts the lens iris.

(2) Shutter speed/flickering-reduction operation

Sets the shutter speed to Normal (1/50), 1/120 (flickering-reduction), 1/125, 1/250, 1/500, 1/1000, 1/2000,

1/4000, 1/10000 or AES.

(3) Backlight compensation

Prevents an object from becoming too dark and the back ground from becoming too white to be viewed due to

backlight.

(4) Automatic gain control (AGC)/sensitivity levels

An AGC level can be automatically maintained constant, automatically changed or set for OFF. Also, a

sensitivity level can be changed in increments of OFF, 2 times, 4 times, 6 times, 8 times, 10 times, 16 times,

24 times or 32 times.

(5) White balance

Four modes are made available for selection: ATW, AWB, MANUAL 1 and MANUAL 2.

ATW:

AWB:

MANUAL 1 and MANUAL 2: Select either mode to adjust the white balance so that the color looks natural

(6) Chroma level

You can adjust the chroma level as you like.

(7) Image quality (enhancement)

You can enhance the contours of an image as you like.

(8) Camera ID title

Up to 8 alphanumeric characters and symbols can be used to set a camera ID title. You can select the ID title

display position from "Lower Right," "Lower Left," "Upper Left," and "Upper Right" of the screen.

Reset

The camera functions can be reset to the factory-preset values (initial setting status). Refer to p. 11.

The camera's white balance varies as an object's color temperature varies.

The camera operates on the initially-set white balance even if an object's color

temperature changes, once the camera white balance is adjusted when the

camera is installed.

when an object is viewed under a special light source.