HIKVISION TURBO HD 4K Series Руководство пользователя - Страница 5
Просмотреть онлайн или скачать pdf Руководство пользователя для Камера безопасности HIKVISION TURBO HD 4K Series. HIKVISION TURBO HD 4K Series 12 страниц. Turret & dome camera
Также для HIKVISION TURBO HD 4K Series: Руководство пользователя (14 страниц)
Печатать страницу
2 Installation
Before you start:
Make sure that the device in the package is in good
condition and all the assembly parts are included.
Make sure that all the related equipment is power-off
during the installation.
Check the specification of the products for the
installation environment.
Check whether the power supply is matched with
your required output to avoid damage.
Make sure the wall is strong enough to withstand
three times the weight of the camera and the mount.
If the wall is cement, insert expansion screws before
installing the camera. If the wall is wooden, use
self-tapping screw to secure the camera.
If the product does not work properly, contact your
dealer or the nearest service center. Do NOT
disassemble the camera for repair or maintenance by
yourself.
2.1 Installation of Type I Camera
Before you start:
Both wall mounting and ceiling mounting are suitable
for the turret camera. Ceiling mounting will be taken as
an example in this section. You can take steps of ceiling
mounting as the reference, when adopting the wall
mounting.
Steps:
1.
Disassemble the camera.
1). Rotate the camera to align the notch to one of the
marks.
2). Pry the mounting base to remove the mounting base
from the
Mark
Notch
2. Paste the drill template (supplied) to the place
where you want to install the camera.
3. Drill the screw holes according to the drill template,
and the cable hole (optional) on the ceiling.
Note:
Drill the cable hole in the center of the drill template,
when adopting the ceiling outlet to route the cable.
Available from A1 Security Cameras
w.a1securitycameras.com email: sales@a1securitycamera
amera body with a flat object, e.g., a coin.
c
Figure 2-1 Disassemble the Camera
Figure 2-2 Drill Template
Coin