IKEA B1712 Руководство - Страница 6

Просмотреть онлайн или скачать pdf Руководство для Освещение дома IKEA B1712. IKEA B1712 13 страниц.

OPERATION

Safety measures

Important! All works on assembly and installation of the lamp should be performed only

with a disconnected power supply!

- It is prohibited to use the lamp in a very humid environment (bathroom, etc.).

- If you use bulbs with higher capacity or of a structure different than those indicated in the user manual

and on the lamp's marking, the lamp may stop working and result in the loss of the right for warranty

service.

- Clean the lamp with a soft dry cloth.

- Do not use chemically active or aggressive cleaning agents to clean the lamp.

How to use

Inspect the product in order to ensure the integrity of the plug, the power cord and the lamp. Put the

bulb into the lamp. Insert the plug into the socket.

To replace the bulb:

• Disconnect the lamp from the power supply network.

• Give the bulb and the lamp case time to cool down.

• Make sure, that the replacement bulb suits the lamp in terms of type and capacity.

• Remove the old bulb and install the new bulb.

The product should be transported and stored in the package in compliance with safety precautions to

avoid mechanical damage and exposure to atmospheric precipitation.

DISPOSAL

The product should be disposed of in compliance with local legal requirements.

The crossed-out wheeled bin symbol indicates that the item should be disposed of separately

from household waste. The item should be handed in for recycling in accordance with local

environmental regulations for waste disposal. By separating a marked item from household

waste, you will help reduce the volume of waste sent to incinerators or land-fill and minimize

any potential negative impact on human health and the environment. For more information, please

contact your IKEA store.

PROBABLE MALFUNCTIONS AND METHODS FOR REMEDY

Important! All works targeted at the remedy of possible malfunction of the product

should be performed only with a disconnected power supply!

- check the supply-line voltage

The lamp

- make sure that the bulb has suitable voltage and capacity

doesn't work

- check the bulb's performing capacity

- check the bulb's position

If these methods were of no use, contact qualified specialists.

AA-2163908-2