HIKVISION TURBO HD H0T Series Руководство пользователя - Страница 12

Просмотреть онлайн или скачать pdf Руководство пользователя для Камера безопасности HIKVISION TURBO HD H0T Series. HIKVISION TURBO HD H0T Series 16 страниц. Turbo hd turret & dome camera
Также для HIKVISION TURBO HD H0T Series: Руководство пользователя (16 страниц), Руководство пользователя (17 страниц), Руководство пользователя (14 страниц)

5. Route the cables through the cable hole, or the side

opening.

6. Connect the corresponding cables, such as power

cord, and network cable.

7. Power on the camera to check whether the image on

the monitor is gotten from the optimum angle. If not,

adjust the camera according to the figure below to get

an optimum angle

0° to 75°

Figure 2-22 Type I Camera 2-Axis Adjustment

1). Loosen the tilt adjusting screw to adjust the tilt

position [0° to 75°].

2). Hold the black liner to adjust the pan position [0°

to 355°].

3). Hold the camera body to adjust the rotation

position [0° to 355°].

8. Reinstall the bubble, and tighten the screws.

Purpose:

Call the menu by clicking the button

Control interface, or call preset No.95.

Steps:

1. Connect the camera with the TVI DVR, and the

monitor, shown as the figure 3-1.

Camera

2. Power on the analog camera, TVI DVR, and the

monitor to view the image on the monitor.

3. Click PTZ Control to enter the PTZ Control interface.

4. Call the camera menu by clicking

preset No. 95.

Figure 2-21 Fix the Mounting Base

Figure 2-23 Bubble Reinstallation

Figure 3-1 Connection

0° to 355°

Adjusting Screw

0° to 355°

TVI DVR

on the PTZ

Monitor

button, or call