KitchenAid KDC-38 Руководство по установке - Страница 6
Просмотреть онлайн или скачать pdf Руководство по установке для Посудомоечная машина KitchenAid KDC-38. KitchenAid KDC-38 6 страниц.
CAUTION
For installation
when
the dishwasher
is to be left unused in
freezing
temperatures:
Turn off electrical
power. Shut off water
supply
at the hand valve. Remove lower panel. Disconnect
both
inlet and outlet
lines at the DRAIN
valve. This permits water to
drain
from
the dishwasher
tank,
pump
and drain
line.
Dis-
connect
both the inlet and outlet
lines at the FILL valve. Make
provisions
to control
water drained from unit.
Reinstall
lower
panel. Turn on electrical
power. Then, push door handle down
to
lock
position
and
push
"Normal
Cycle"
button.
Let
dishwasher
run through
first pre-rinse only (approximately
four
minutes)
to drain all water trapped
in the dishwasher.
Turn off
electricity.
To complete
installation
later:
Connect
drain and fill valves-both
inlet and outlet.
Reinstall
lower panel.
Turn
on water
and electrical
supply.
Then
push
button
for cycle desired.
DETAILS AND CONNECTIONS
KDC-38
& KDS-38
BASIC
DIMENSIONS
KITCHENAID
DIVISION
\HOBAFtT(
TROY.
OHIO
45374
FORM
12194D
(Rev.
8-78)
(Supsds.
F. 12194C.
4-78)
PRINTED
IN U.S.A.
-597
7g.