HIKVISION TURBO HD U7T Series Руководство пользователя - Страница 8
Просмотреть онлайн или скачать pdf Руководство пользователя для Камера безопасности HIKVISION TURBO HD U7T Series. HIKVISION TURBO HD U7T Series 15 страниц. Turret & dome camera
Также для HIKVISION TURBO HD U7T Series: Руководство пользователя (15 страниц), Руководство пользователя (15 страниц)
Печатать страницу
Figure 2-9 Install the Camera to the Ceiling/Wall
Note:
The supplied screw package contains self-tapping
screws, and expansion bolts.
For cement wall/ceiling, expansion bolts are
required to fix the camera. For wooden
wall/ceiling, self-tapping screws are required.
5. Connect the corresponding power cord, and video
cable.
6. Power on the camera to check whether the image
on the monitor is gotten from the optimum angle. If
not, adjust the camera according to the figure below
to get an optimum angle.
Rotation Position
[0° to 360°]
1). Loosen the No.1 screw to adjust the rotation
position [0° to360°].
2). Loosen the No.2 screw to adjust the tilt position
[0° to 180°].
3). Loosen the No.3 screw to adjust the pan
position [0° to 360°].
2.2.2 Ceiling/Wall Mounting with Junction Box
Before you start:
You need to purchase a junction box separately.
Steps:
1. Paste the drill template on the ceiling/wall.
2. Drill screw holes and the cable hole (optional) in the
ceiling/wall according to the holes of the drill
template.
Figure 2-11 Drill Template of Junction Box
Note:
Drill the cable hole, when adopting ceiling outlet to
route the cable.
3. Take apart the junction box, and align the screw
holes of the camera with those on the Junction
box's cover.
Figure 2-10 3-Axis Adjustment
Pan Position
[0° to 360°]
Tilt Position
[0° to 180°]