HIKVISION UD01984B Руководство пользователя - Страница 7

Просмотреть онлайн или скачать pdf Руководство пользователя для Камера безопасности HIKVISION UD01984B. HIKVISION UD01984B 15 страниц. Hd 1080p turret & bullet camera

Печатать страницу

Figure 2. 5 Drill the Template

3. Route the cables to the cable hole and connect the

corresponding cables, such as power cable, and

video cable.

4. Fix the camera to the ceiling with the supplied

screws.

Figure 2. 6 Fix the Camera to the Ceiling

Note:

In the supplied screw package, both self-tapping



screws and expansion blots are contained.

If the wall is cement, expansion blots are required



to fix the camera. If the wall is wooden,

self-tapping screws are required.

5. Power on the camera to check whether the image

on the monitor is gotten from the optimum angle. If

not, adjust the surveillance angle.

1) Loosen the No.1 adjusting screw to adjust the

pan position (0° to 360°).

2) Tighten the No.1 adjusting screw.

3) Loosen the No.2 adjusting screw to adjust the

tilting position (0° to 90°).

4) Tighten the No. 2 adjusting screw.

5) Loosen the No.3 adjusting screw to adjust the

rotation position (0° to 360°).

6) Tighten the No.3 adjusting screw.

0° to 360°

Figure 2. 7 3-Axis Adjustment

Chapter 3

Two methods are available to call the menu. This

section takes method b) as an example to state the

menu operation.

a) Call the menu and adjust the camera parameters

with a coaxial camera controller (purchase

separately).

b) Call the menu with supported TVI DVR by clicking

button on the PTZ interface, or by calling preset No.

95.

Camera

0° to 90°

0° to 360°

Menu Operation

Figure 3. 1 Connection

TVI DVR

Monitor