Briteq BEAMSPOT1-DMX WW Руководство по эксплуатации - Страница 8

Просмотреть онлайн или скачать pdf Руководство по эксплуатации для Осветительное оборудование Briteq BEAMSPOT1-DMX WW. Briteq BEAMSPOT1-DMX WW 12 страниц.

Печатать страницу

ENGLISH

NO DMX BEHAVIOR

Used to set how the projector reacts when the DMX-signal suddenly disappears.

 Press the [MENU] button or ▲/▼buttons until the desired function is showing on the display.

 Press the [ENTER] button: the values can be changed

 Use ▲/▼buttons to select the desired mode:

 BLACKOUT

 FREEZE:

 Once the correct option shows on the display, press the [ENTER] button to save it.

Note: as soon as the input detects a DMX-signal, blackout or freeze mode will be cancelled.

DEFAULT SETTINGS

This is your emergency exit if you really messed up the settings: just return to factory settings.

Also 2 user settings can be saved/loaded.

 Press the [MENU] button or ▲/▼buttons until the desired function is showing on the display.

 Press the ENTER button: the values can be changed

 Use ▲/▼buttons to selected the desired settings:

 [FACTORY]

 [USER1]

 [USER2]

 Press the [ENTER] button:

 [FACTORY] was selected: the display shows [LOAD]

 Press the [ENTER] button: the display shows [ACTION?]

 Use ▲/▼buttons to select [YES / NO]

 Press the [ENTER] button to confirm.

 [USER1 / USER2] was selected:

 Use ▲/▼buttons to select [LOAD / SAVE]

 Press the [ENTER] button to confirm: the display shows [ACTION?]

 Use ▲/▼buttons to select [YES / NO]

 Press the [ENTER] button to confirm.

 [SAVE] was selected: the current settings of the setup menu are saved to memory.

 [LOAD] was selected: the previously saved settings are loaded.

Default factory settings:

PARAMETER name

DMX Channel mode

MASTER DIM

DIM Curve

LED behavior

Auto Lock Menu

No DMX mode

FIRMWARE VERSION

Used to show the current version of the firmware.

 Press the [MENU] button or ▲/▼buttons until the desired function is showing on the display.

The firmware of this unit can be upgraded using a special upgrade tool with Windows

available from Briteq).

Each time the projector is switched on, the display shows "UPDATE Wait ....": while this message shows on

the display you can start the update using our special upgrade tool. More information about this can be found

in the user manual of the upgrade tool and / or our website: www.briteq-lighting.com

BRITEQ

output turns black while no DMX is detected.

output based on the last valid DMX-signal is kept on the projector.

Defaults factory

CH02

100%

Square

Halogen

OFF

Freeze

USER defaults 1

Current setting in the menu

6/9

BEAMSPOT1-DMX NW (WW)

OPERATION MANUAL

USER defaults 2

Current setting in the menu

software. (separately