Cequent Towing Products 30059 Руководство по эксплуатации - Страница 4
Просмотреть онлайн или скачать pdf Руководство по эксплуатации для Автомобильные аксессуары Cequent Towing Products 30059. Cequent Towing Products 30059 9 страниц. 24k 5th wheel hitch
6. With all trailer wheels still firmly blocked, landing gear still resting on firm ground and supporting trailer weight, and truck
stationary and in park with emergency brake on: visually check that bottom of pin box is resting on top of the hitch.
THERE SHOULD BE NO SPACE BETWEEN THESE SURFACES (see Figure 6). If space exists, (see Figure 7) trailer
has not been properly hitched. DO NOT TOW! Instead, repeat above steps until trailer is properly hitched. DO NOT
PLACE BODY UNDER TRAILER TO PERFORM THIS INSPECTION!
No Space
Figure 6
CORRECT
7. Place bail pin through hole to make sure the hitch jaw is locked closed. IF FLAG BLOCKS HOLE FOR BAIL PIN,
TRAILER HAS NOT BEEN PROPERLY CONNECTED TO HITCH. DO NOT TOW! Repeat above steps until trailer is
properly hitched. (see Figure 8)
8. With:
•All trailer wheels still firmly blocked in front and behind each tire, and
•Truck stationary with the emergency brake on, and
•Trailer landing gear still resting on firm ground and supporting trailer weight; and
•Truck stationary and with emergency brake on:
Connect electrical cable between truck and trailer, connect breakaway switch cable from pin box to a permanent
part of truck, and raise tailgate of truck. Do not tow trailer until the Pull Test has been successfully completed.
30059OP - 15MAR05D
FOR KITS 30059, 40259 & 50259
Hole for bail pin
Flag
Figure 8
PCN7735
©2005 CEQUENT TOWING PRODUCTS, INC
GAP
Figure 7
WRONG
King Pin
Jaw closed
High Pin
LITHO IN USA