IKEA FINPUTSAD 700 Руководство - Страница 8

Просмотреть онлайн или скачать pdf Руководство для Посудомоечная машина IKEA FINPUTSAD 700. IKEA FINPUTSAD 700 20 страниц. Integrated

Печатать страницу
IKEA FINPUTSAD 700 Руководство
Make sure the cap is screwed on tightly, so that no detergent can
get into the container during the wash program (this could damage
the water softener beyond repair).
ENGLISH
As soon as this procedure is complete, run a program without
loading. The "Pre-Wash" program alone is NOT� � � � � �
Residual saline solution or grains of salt can lead to corrosion,
irreparably damaging the stainless steel components.
The guarantee is not applicable if faults are caused by such
Make sure the cap is screwed on tightly, so that no detergent
can get into the container during the wash program (this could
circumstances.
ENGLISH
damage the water softener beyond repair).
� � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � �
As soon as this procedure is complete, run a program without
� � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � �
ENGLISH
loading. The "Pre-Wash" program alone is NOT SUFFICIENT
heating element may be damaged as a result.
Residual saline solution or grains of salt can lead to corrosion,
Whenever you need to add salt, it is mandatory to complete
Make sure the cap is screwed on tightly, so that no detergent can
irreparably damaging the stainless steel components.
the procedure before the beginning of the washing cycle.
get into the container during the wash program (this could damage
The guarantee is not applicable if faults are caused by such
Make sure the cap is screwed on tightly, so that no detergent can
the water softener beyond repair).
circumstances.
get into the container during the wash program (this could damage
ENGLISH
SETTING THE WATER HARDNESS
the water softener beyond repair).
As soon as this procedure is complete, run a program without
To allow the water softener to work in a perfect way, it is essential
As soon as this procedure is complete, run a program without
Only use salt that has been specifically designed for
loading. The "Pre-Wash" program alone is NOT� � � � � �
loading. The "Pre-Wash" program alone is NOT� � � � � �
that the water hardness setting is based on the actual water hard-
dishwashers. If the salt container is not filled, the water
Residual saline solution or grains of salt can lead to corrosion,
Residual saline solution or grains of salt can lead to corrosion,
ness in your house. This information can be obtained from your local
softener and the heating element may be damaged
Make sure the cap is screwed on tightly, so that no detergent can
irreparably damaging the stainless steel components.
irreparably damaging the stainless steel components.
get into the container during the wash program (this could damage
as a result of limescale accumulation. Using of Salt is
water supplier. The factory setting is for average (3) water hardness.
The guarantee is not applicable if faults are caused by such
The guarantee is not applicable if faults are caused by such
the water softener beyond repair).
recommended with any type of dishwasher detergent.
circumstances.
circumstances.
As soon as this procedure is complete, run a program without
• Switch on the appliance by pressing the ON/OFF button.
Whenever you need to add salt, it is mandatory to complete
� � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � �
� � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � �
loading. The "Pre-Wash" program alone is NOT� � � � � �
• Switch off the appliance by pressing the ON/OFF button.
the procedure before the beginning of the washing cycle to
� � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � �
Residual saline solution or grains of salt can lead to corrosion,
� � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � �
• Hold down button
avoid corrosion.
heating element may be damaged as a result.
irreparably damaging the stainless steel components.
heating element may be damaged as a result.
• Switch on the appliance by pressing the ON/OFF button.
Whenever you need to add salt, it is mandatory to complete
The guarantee is not applicable if faults are caused by such
Whenever you need to add salt, it is mandatory to complete
Setting the water hardness
the procedure before the beginning of the washing cycle.
•
The current selection level number and the salt indicator light
circumstances.
the procedure before the beginning of the washing cycle.
To allow the water softener to work in a perfect way, it is
� � � � � �
� � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � �
SETTING THE WATER HARDNESS
essential that the water hardness setting is based on the actual
� � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � �
•
Press button
to select the desired hardness level (see
To allow the water softener to work in a perfect way, it is essential
water hardness in your house.
SETTING THE WATER HARDNESS
heating element may be damaged as a result.
WATER HARDNESS TABLE).
that the water hardness setting is based on the actual water hard-
from your local water supplier. The factory sets the default
Whenever you need to add salt, it is mandatory to complete
To allow the water softener to work in a perfect way, it is essential
ness in your house. This information can be obtained from your local
the procedure before the beginning of the washing cycle.
water hardness
Water Hardness Table
that the water hardness setting is based on the actual water hard-
water supplier. The factory setting is for average (3) water hardness.
ness in your house. This information can be obtained from your local
• Switch on the appliance by pressing the ON/OFF button.
SETTING THE WATER HARDNESS
• Switch on the appliance by pressing the ON/OFF button.
Level
water supplier. The factory setting is for average (3) water hardness.
• Switch off the appliance by pressing the ON/OFF button.
To allow the water softener to work in a perfect way, it is essential
• Switch off the appliance by pressing the ON/OFF button.
• Hold down button
that the water hardness setting is based on the actual water hard-
• Hold down button
1
Soft
• Switch on the appliance by pressing the ON/OFF button.
ness in your house. This information can be obtained from your local
• Switch on the appliance by pressing quickly the ON/OFF
• Switch on the appliance by pressing the ON/OFF button.
• Switch off the appliance by pressing the ON/OFF button.
water supplier. The factory setting is for average (3) water hardness.
2
Medium
button.
•
The current selection level number and the salt indicator light
• Hold down button
for 5 seconds, until you hear a beep.
• The current selection level number and the salt indicator light
� � � � � �
• Switch on the appliance by pressing the ON/OFF button.
3
Average
•
Press button
to select the desired hardness level (see
• Switch on the appliance by pressing the ON/OFF button.
both flash
• Switch off the appliance by pressing the ON/OFF button.
4
WATER HARDNESS TABLE).
Hard
• Press button
to select the desired hardness level (see
The current selection level number and the salt indicator light
•
• Hold down button
for 5 seconds, until you hear a beep.
WATER HARDNESS TABLE).
• Switch on the appliance by pressing the ON/OFF button.
� � � � � �
Water Hardness Table
5
Very hard
•
The current selection level number and the salt indicator light
• Switch off the appliance by pressing the ON/OFF button.
•
Press button
to select the desired hardness level (see
Level
� � � � � �
Setting is complete!
WATER HARDNESS TABLE).
• Switch off the appliance by pressing the ON/OFF button.
•
Press button
to select the desired hardness level (see
1
Soft
Setting is complete!
WATER HARDNESS TABLE).
Water Hardness Table
Water Hardness Table
2
Medium
Water Hardness Table
FILLING THE RINSE AID DISPENSER
3
Level
Average
Level
Level
German
4
Hard
Rinse aid makes dish DRYING easier. The rinse aid dispenser A
1
Soft
degrees
1
should be filled when the RINSE AID REFILL indicator light
5
Soft
Very hard
2
Medium
in the control panel is lit.
2
Medium
1
Soft
• Switch off the appliance by pressing the ON/OFF button.
3
Average
3
Average
Setting is complete!
2
Medium
4
Hard
4
Hard
FILLING THE RINSE AID DISPENSER
3
Average
5
Very hard
5
Very hard
Rinse aid makes dish DRYING easier. The rinse aid dispenser A
4
Hard
• Switch off the appliance by pressing the ON/OFF button.
should be filled when the RINSE AID REFILL indicator light
• Switch off the appliance by pressing the ON/OFF button.
Setting is complete!
in the control panel is lit.
5
Very hard
Setting is complete!
FILLING THE RINSE AID DISPENSER
Rinse aid makes dish DRYING easier. The rinse aid dispenser A
Filling the rinse aid dispenser
FILLING THE RINSE AID DISPENSER
B
should be filled when the RINSE AID REFILL indicator light
1. Open the dispenser B by pressing and pulling up the tab on
Rinse aid makes dish DRYING easier. The rinse aid dispenser A
Rinse aid makes dish DRYING easier. The rinse aid dispenser A
in the control panel is lit.
should be filled when the RINSE AID REFILL indicator light
the lid.
should be filled when the RINSE AID REFILL indicator light
the control panel is lit.
2. Carefully introduce the rinse aid as far as the maximum
in the control panel is lit.
(110 ml) reference notch of the filling space - avoid spilling it.
B
If this happens, clean the spill immediately with a dry cloth.
1. Open the dispenser B by pressing and pulling up the tab on
3. Press the lid down until you hear a click to close it.
the lid.
NEVER pour the rinse aid directly into the tub.
2. Carefully introduce the rinse aid as far as the maximum
(110 ml) reference notch of the filling space - avoid spilling it.
If this happens, clean the spill immediately with a dry cloth.
B
3. Press the lid down until you hear a click to close it.
1. Open the dispenser B by pressing and pulling up the tab on
NEVER pour the rinse aid directly into the tub.
the lid.
2. Carefully introduce the rinse aid as far as the maximum
B
B
(110 ml) reference notch of the filling space - avoid spilling it.
1. Open the dispenser B by pressing and pulling up the tab on
1. Open the dispenser B by pressing and pulling up the tab on
If this happens, clean the spill immediately with a dry cloth.
the lid.
3. Press the lid down until you hear a click to close it.
the lid.
NEVER pour the rinse aid directly into the tub.
2. Carefully introduce the rinse aid as far as the maximum (110
2. Carefully introduce the rinse aid as far as the maximum
ml) reference notch of the filling space - avoid spilling it. If this
(110 ml) reference notch of the filling space - avoid spilling it.
happens, clean the spill immediately with a dry cloth.
If this happens, clean the spill immediately with a dry cloth.
3. Press the lid down until you hear a click to close it.
3. Press the lid down until you hear a click to close it.
NEVER pour the rinse aid directly into the tub.
NEVER pour the rinse aid directly into the tub.
Adjusting the dosage of rinse aid
ENGLISH
for 5 seconds, until you hear a beep.
Product description
This information can be obtained
7
°dH
German degrees
for 5 seconds, until you hear a beep.
8
for 5 seconds, until you hear a beep.
0 - 6
7 - 11
12 - 17
18 - 34
35 - 50
9
°dH
German degrees
French degrees
0 - 6
0 - 10
7 - 11
11 - 20
°dH
12 - 17
21 - 30
°dH
°fH
°dH
°fH
German degrees
French degrees
French
18 - 34
31 - 60
German degrees
French degrees
0 - 6
degrees
0 - 6
35 - 50
0 - 10
61 - 90
7 - 11
7 - 11
11 - 20
0 - 6
0 - 10
12 - 17
12 - 17
21 - 30
7 - 11
11 - 20
18 - 34
31 - 60
18 - 34
11
12 - 16
21 - 29
35 - 50
61 - 90
35 - 50
17 - 34
30 - 60
35 - 50
61 - 90
Control panel
A
1
1.
On-Off/Reset button with indicator light
A
2.
Program selection button
3.
Salt refill indicator ligh
4.
Rinse Aid refill indicator ligh
A
A
5.
Program number and delay time indicator
6.
Tablet indicator light
First use
ADVICE REGARDING THE FIRST TIME USE
After installation, remove the stoppers from the racks and the
retaining elastic elements from the upper rack.
FILLING THE SALT RESERVOIR
The use of salt prevents the formation of LIMESCALE on the
dishes andon the machine's functional components.
loading. The "Pre-Wash" program alone is NOT� � � � � �
� � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � �
Residual saline solution or grains of salt can lead to corrosion,
ADJUSTING THE DOSAGE OF RINSE AID
� � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � �
irreparably damaging the stainless steel components.
If you are not completely satisfied with the drying results, you can
heating element may be damaged as a result.
The guarantee is not applicable if faults are caused by such
adjust the quantity of rinse aid used.
Whenever you need to add salt, it is mandatory to complete
circumstances.
the procedure before the beginning of the washing cycle.
• Switch the dishwasher on using the ON/OFF button.
� � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � �
� � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � �
• Switch it off using the ON/OFF button.
SETTING THE WATER HARDNESS
heating element may be damaged as a result.
• Press button
To allow the water softener to work in a perfect way, it is essential
Whenever you need to add salt, it is mandatory to complete
• Switch it on using the ON/OFF button.
that the water hardness setting is based on the actual water hard-
the procedure before the beginning of the washing cycle.
•
The current selection level number and rinse aid indicator light flash.
ness in your house. This information can be obtained from your local
If you are not completely satisfied with the drying results, you
water supplier. The factory setting is for average (3) water hardness.
can adjust the quantity of rinse aid used.
•
Press button
SETTING THE WATER HARDNESS
• Switch the dishwasher on using the ON/OFF button.
s.
supplied.
To allow the water softener to work in a perfect way, it is essential
• Switch on the appliance by pressing the ON/OFF button.
• Switch it off using the ON/OFF button.
that the water hardness setting is based on the actual water hard-
• Switch it off using the ON/OFF button.
• Switch off the appliance by pressing the ON/OFF button.
ness in your house. This information can be obtained from your local
• Press button
• Hold down button
Setting is complete!
water supplier. The factory setting is for average (3) water hardness.
• Switch it on using the ON/OFF button.
• Switch on the appliance by pressing the ON/OFF button.
ADJUSTING THE DOSAGE OF RINSE AID
If the rinse aid level is set to ZERO (ECO), no rinse aid will be
• The current selection level number and rinse aid indicator
•
The current selection level number and the salt indicator light
• Switch on the appliance by pressing the ON/OFF button.
supplied. The LOW RINSE AID indicator light will not be lit if you
If you are not completely satisfied with the drying results, you can
ADJUSTING THE DOSAGE OF RINSE AID
� � � � � �
light flash.
• Switch off the appliance by pressing the ON/OFF button.
run out of rinse aid. A maximum of 5 levels can be set according to
•
Press button
If you are not completely satisfied with the drying results, you can
• Press button
adjust the quantity of rinse aid used.
• Hold down button
WATER HARDNESS TABLE).
adjust the quantity of rinse aid used.
the dishwasher model. The factory setting is specific to the model,
supplied.
• Switch the dishwasher on using the ON/OFF button.
• Switch on the appliance by pressing the ON/OFF button.
• Switch the dishwasher on using the ON/OFF button.
• Switch it off using the ON/OFF button.
please follow instruction above to check this for your machine.
•
The current selection level number and the salt indicator light
• Switch it off using the ON/OFF button.
• Switch it off using the ON/OFF button.
� � � � � �
• If you see bluish streaks on the dishes, set a low number (1-2).
• Press button
Setting is complete!
• Press button
ADJUSTING THE DOSAGE OF RINSE AID
Level
•
Press button
• If there are drops of water or limescale marks on the dishes,
• Switch it on using the ON/OFF button.
• Switch it on using the ON/OFF button.
If the rinse aid level is set to ZERO, no rinse aid will be supplied.
WATER HARDNESS TABLE).
If you are not completely satisfied with the drying results, you can
set a high number (3-4).
•
The current selection level number and rinse aid indicator light flash.
•
The current selection level number and rinse aid indicator light flash.
1
The LOW RINSE AID indicator light will not be lit if you run out
adjust the quantity of rinse aid used.
•
Press button
•
Press button
of rinse aid. A maximum of 5 levels can be set according to the
2
Medium
• Switch the dishwasher on using the ON/OFF button.
s.
supplied.
s.
dishwasher model. The factory setting is specific to the model,
supplied.
• Switch it off using the ON/OFF button.
Level
3
Average
FILLING THE DETERGENT DISPENSER
• Switch it off using the ON/OFF button.
• Press button
please follow instruction above to check this for your machine.
three times - a beep will be heard.
• Switch it off using the ON/OFF button.
Setting is complete!
4
1
• Switch it on using the ON/OFF button.
• If you see bluish streaks on the dishes, set a low number (1-2).
� � � � � � � � � � � � � � � � � � � � � � � � � � � � � �
Setting is complete!
If the rinse aid level is set to ZERO (ECO), no rinse aid will be
•
The current selection level number and rinse aid indicator light flash.
5
Very hard
• If there are drops of water or limescale marks on the dishes,
2
Medium
dishwashers.
If the rinse aid level is set to ZERO (ECO), no rinse aid will be
supplied. The LOW RINSE AID indicator light will not be lit if you
•
Press button
to select the level of rinse aid quantity to be
set a high number (3-4).
3
To achieve the best washing and drying results, the combined
Average
run out of rinse aid. A maximum of 5 levels can be set according to
supplied.
• Switch off the appliance by pressing the ON/OFF button.
supplied. The LOW RINSE AID indicator light will not be lit if you
s.
useof detergent, rinse aid liquid and refined salt is required.
the dishwasher model. The factory setting is specific to the model,
• Switch it off using the ON/OFF button.
Setting is complete!
4
run out of rinse aid. A maximum of 5 levels can be set according to
Filling the detergent dispenser
please follow instruction above to check this for your machine.
Setting is complete!
We recommend using detergents that do not contain phosphates
5
the dishwasher model. The factory setting is specific to the model,
Very hard
To achieve the best washing and drying results, the combined
• If you see bluish streaks on the dishes, set a low number (1-2).
FILLING THE RINSE AID DISPENSER
or chlorine, as these products are harmful to the environment.
If the rinse aid level is set to ZERO (ECO), no rinse aid will be
please follow instruction above to check this for your machine.
useof detergent, rinse aid liquid and refined salt is required. We
• If there are drops of water or limescale marks on the dishes,
supplied. The LOW RINSE AID indicator light will not be lit if you
• Switch off the appliance by pressing the ON/OFF button.
Good washing results also depend on the correct amount of
Rinse aid makes dish DRYING easier. The rinse aid dispenser A
recommend using detergents that do not contain phosphates
• If you see bluish streaks on the dishes, set a low number (1-2).
set a high number (3-4).
run out of rinse aid. A maximum of 5 levels can be set according to
Setting is complete!
should be filled when the RINSE AID REFILL indicator light
detergent being used.
°fH
or chlorine, as these products are harmful to the environment.
• If there are drops of water or limescale marks on the dishes,
the dishwasher model. The factory setting is specific to the model,
in the control panel is lit.
Good washing results also depend on the correct amount of
French degrees
Exceeding the stated amount does not result in a more effective
set a high number (3-4).
please follow instruction above to check this for your machine.
FILLING THE RINSE AID DISPENSER
FILLING THE DETERGENT DISPENSER
detergent being used.
• If you see bluish streaks on the dishes, set a low number (1-2).
wash and increases environmental pollution.
0 - 10
Rinse aid makes dish DRYING easier. The rinse aid dispenser A
� � � � � � � � � � � � � � � � � � � � � � � � � � � � � �
Exceeding the stated amount does not result in a more effective
• If there are drops of water or limescale marks on the dishes,
The amount can be adjusted to the soil level. In the case of
should be filled when the RINSE AID REFILL indicator light
dishwashers.
11 - 20
wash and increases environmental pollution. The amount can
set a high number (3-4).
FILLING THE DETERGENT DISPENSER
normally soiled items, use approximately either 35g (powder
in the control panel is lit.
To achieve the best washing and drying results, the combined
be adjusted to the soil level. In the case of normally soiled items,
21 - 30
detergent) or 35ml (liquid detergent) and additional tea spoon of
useof detergent, rinse aid liquid and refined salt is required.
� � � � � � � � � � � � � � � � � � � � � � � � � � � � � �
use approximately either 25g (powder detergent) or 25ml (liquid
FILLING THE DETERGENT DISPENSER
We recommend using detergents that do not contain phosphates
detergent directly inside the tub. If tablets are used, one tablet
dishwashers.
31 - 60
detergent) and additional tea spoon of detergent directly inside
or chlorine, as these products are harmful to the environment.
will be enough.
� � � � � � � � � � � � � � � � � � � � � � � � � � � � � �
To achieve the best washing and drying results, the combined
the tub. If tablets are used, one tablet will be enough.
61 - 90
Good washing results also depend on the correct amount of
dishwashers.
If the crockery is only lightly soiled or if it has been rinsed with
If the crockery is only lightly soiled or if it has been rinsed
useof detergent, rinse aid liquid and refined salt is required.
detergent being used.
°fH
To achieve the best washing and drying results, the combined
1. Open the dispenser B by pressing and pulling up the tab on
with water before being placed in the dishwasher, reduce the
water before being placed in the dishwasher, reduce the amount
We recommend using detergents that do not contain phosphates
Exceeding the stated amount does not result in a more effective
useof detergent, rinse aid liquid and refined salt is required.
the lid.
amount of detergent used accordingly (minimum 25 g/ml) e.g.
of detergent used accordingly (minimum 25 g/ml) e.g. skip the
or chlorine, as these products are harmful to the environment.
wash and increases environmental pollution.
We recommend using detergents that do not contain phosphates
2. Carefully introduce the rinse aid as far as the maximum
skip the powder/gel putted inside the tub.
powder/gel putted inside the tub.
Good washing results also depend on the correct amount of
The amount can be adjusted to the soil level. In the case of
or chlorine, as these products are harmful to the environment.
(110 ml) reference notch of the filling space - avoid spilling it.
normally soiled items, use approximately either 35g (powder
Good washing results also depend on the correct amount of
detergent being used.
°fH
If this happens, clean the spill immediately with a dry cloth.
1. Open the dispenser B by pressing and pulling up the tab on
°Clark
detergent) or 35ml (liquid detergent) and additional tea spoon of
detergent being used.
3. Press the lid down until you hear a click to close it.
Exceeding the stated amount does not result in a more effective
the lid.
English
detergent directly inside the tub. If tablets are used, one tablet
NEVER pour the rinse aid directly into the tub.
Exceeding the stated amount does not result in a more effective
2. Carefully introduce the rinse aid as far as the maximum
wash and increases environmental pollution.
0 - 10
will be enough.
degrees
wash and increases environmental pollution.
(110 ml) reference notch of the filling space - avoid spilling it.
If the crockery is only lightly soiled or if it has been rinsed with
The amount can be adjusted to the soil level. In the case of
The amount can be adjusted to the soil level. In the case of
11 - 20
If this happens, clean the spill immediately with a dry cloth.
0 - 7
water before being placed in the dishwasher, reduce the amount
normally soiled items, use approximately either 35g (powder
normally soiled items, use approximately either 35g (powder
D
B
3. Press the lid down until you hear a click to close it.
of detergent used accordingly (minimum 25 g/ml) e.g. skip the
21 - 30
detergent) or 35ml (liquid detergent) and additional tea spoon of
detergent) or 35ml (liquid detergent) and additional tea spoon of
NEVER pour the rinse aid directly into the tub.
8 - 14
powder/gel putted inside the tub.
A
C
detergent directly inside the tub. If tablets are used, one tablet
detergent directly inside the tub. If tablets are used, one tablet
31 - 60
will be enough.
15 - 20
will be enough.
61 - 90
If the crockery is only lightly soiled or if it has been rinsed with
If the crockery is only lightly soiled or if it has been rinsed with
water before being placed in the dishwasher, reduce the amount
21 - 42
water before being placed in the dishwasher, reduce the amount
of detergent used accordingly (minimum 25 g/ml) e.g. skip the
of detergent used accordingly (minimum 25 g/ml) e.g. skip the
powder/gel putted inside the tub.
43 - 62
B
powder/gel putted inside the tub.
1. When measuring out the detergent refer to the mentioned
A
1.
When measuring out the detergent refer to the mentioned ear-
A
earlier information to add the proper quantity. Inside the
lier information to add the proper quantity. Inside the dispenser
dispenser
B there are indications to help the detergent dosing.
dosing.
h
2.
Remove detergent residues from the edges of the dispenser
in
B
2. Remove detergent residues from the edges of the dispenser
and close the cover until it clicks.
A
and close the cover until it clicks.
1.
When measuring out the detergent refer to the mentioned ear-
3. Close the lid of the detergent dispenser by pulling it up until
B
3. Close the lid of the detergent dispenser by pulling it up until
lier information to add the proper quantity. Inside the dispenser
the closing device is secured in place.
the closing device is secured in place.
B there are indications to help the detergent dosing.
2
3 4
5
6 7 8
A
2.
Remove detergent residues from the edges of the dispenser
The detergent dispenser automatically opens up at the right
The detergent dispenser automatically opens up at the right time
and close the cover until it clicks.
time according to the program. If all-in-one detergents are used,
according to the program. If all-in-one detergents are used, we
3. Close the lid of the detergent dispenser by pulling it up until
1.
When measuring out the detergent refer to the mentioned ear-
we recommend using the TABLET button, because it adjusts the
recommend using the TABLET button, because it adjusts the
the closing device is secured in place.
lier information to add the proper quantity. Inside the dispenser
program so that the best washing and drying results are always
program so that the best washing and drying results are always
B there are indications to help the detergent dosing.
The detergent dispenser automatically opens up at the right time
achieved.
achieved.
2.
Remove detergent residues from the edges of the dispenser
according to the program. If all-in-one detergents are used, we
1.
When measuring out the detergent refer to the mentioned ear-
and close the cover until it clicks.
recommend using the TABLET button, because it adjusts the
lier information to add the proper quantity. Inside the dispenser
3. Close the lid of the detergent dispenser by pulling it up until
program so that the best washing and drying results are always
B there are indications to help the detergent dosing.
the closing device is secured in place.
achieved.
2.
Remove detergent residues from the edges of the dispenser
The detergent dispenser automatically opens up at the right time
and close the cover until it clicks.
according to the program. If all-in-one detergents are used, we
3. Close the lid of the detergent dispenser by pulling it up until
recommend using the TABLET button, because it adjusts the
program so that the best washing and drying results are always
the closing device is secured in place.
achieved.
The detergent dispenser automatically opens up at the right time
according to the program. If all-in-one detergents are used, we
recommend using the TABLET button, because it adjusts the
program so that the best washing and drying results are always
achieved.
three times - a beep will be heard.
to select the level of rinse aid quantity to be
three times - a beep will be heard.
for 5 seconds, until you hear a beep.
to select the desired hardness level (see
to select the level of rinse aid quantity to be
for 5 seconds, until you hear a beep.
Water Hardness Table
three times - a beep will be heard.
°dH
three times - a beep will be heard.
to select the desired hardness level (see
German degrees
Soft
0 - 6
Water Hardness Table
to select the level of rinse aid quantity to be
to select the level of rinse aid quantity to be
7 - 11
°dH
12 - 17
German degrees
Hard
18 - 34
Soft
0 - 6
35 - 50
7 - 11
12 - 17
Hard
18 - 34
35 - 50
1
2
3
4
B
5
6
B
10
To open the detergent dispenser
press button A.
Introduce the detergent into
the dry dispenser B only.
Place the amount of detergent
To open the detergent dispenser
for pre-washing directly inside
press button A.
the tub.
To open the detergent dispenser
there are indications to help the detergent
D
Introduce the detergent into
press button A.
the dry dispenser B only.
Introduce the detergent into
Place the amount of detergent
3sec
the dry dispenser B only.
for pre-washing directly inside
the tub.
Place the amount of detergent
11
9
10
for pre-washing directly inside
the tub.
7.
Display
8.
Half Load indicator light
9.
Half Load button
10. Delay button
11. START/Pause button with indicator light / Tab
• Switch it off using th
s.
supplied.
• Press button
• Switch it off using th
• Switch it on using th
Setting is complete!
•
The current selection
If the rinse aid level is
•
Press button
8
supplied. The LOW RIN
supplied.
s.
run out of rinse aid. A m
• Switch it off using th
the dishwasher model.
Setting is complete!
please follow instruction
If the rinse aid level is
• If you see bluish stre
supplied. The LOW RIN
• If there are drops of
run out of rinse aid. A m
set a high number (3
8
the dishwasher model.
please follow instruction
8
• If you see bluish stre
FILLING THE DETE
• If there are drops of
� � � � � � � � � �
set a high number (3
dishwashers.
To achieve the best wa
FILLING THE DETE
useof detergent, rinse
8
We recommend using
� � � � � � � � � �
or chlorine, as these pr
dishwashers.
Good washing results
To achieve the best wa
detergent being used.
°fH
useof detergent, rinse
French degrees
Exceeding the stated a
We recommend using
wash and increases en
0 - 10
or chlorine, as these pr
The amount can be ad
Good washing results
11 - 20
normally soiled items,
detergent being used.
°fH
21 - 30
detergent) or 35ml (liqu
French degrees
Exceeding the stated a
detergent directly insid
31 - 60
wash and increases en
0 - 10
will be enough.
The amount can be ad
61 - 90
11 - 20
If the crockery is only l
normally soiled items,
water before being pla
21 - 30
detergent) or 35ml (liqu
of detergent used acco
detergent directly insid
31 - 60
powder/gel putted insid
will be enough.
61 - 90
If the crockery is only l
water before being pla
1.
Upper rack
of detergent used acco
powder/gel putted insid
2.
� � � � � � �
3.
Upper rack height adjuster
B
4.
Upper sprayer arm
A
5.
Lower rack
6.
Cutlery basket
B
7.
Lower sprayer arm
A
8.
Filter Assembly
1.
When measuring ou
9.
Salt reservoir
A
lier information to a
10. Detergent and Rinse Aid dispensers
B there are indicatio
11. Rating plate
2.
Remove detergent
12. Control panel
and close the cover
1.
When measuring ou
A
3. Close the lid of the
lier information to a
the closing device i
B there are indicatio
To open the detergent
To open the detergent dispenser
2.
Remove detergent
The detergent dispens
dispenser press button C.
press button A.
and close the cover
according to the progr
Introduce the detergent
3. Close the lid of the
recommend using the
Introduce the detergent into
into the dry dispenser D
the closing device i
program so that the be
the dry dispenser B only.
only.
achieved.
The detergent dispens
Place the amount of
Place the amount of detergent
according to the progr
detergent for
for pre-washing directly inside
recommend using the
pre-washing directly
the tub.
program so that the be
inside the tub.
achieved.
1. Remove the lower rack and
unscrew the reservoir cap
(anticlockwise).
2. Only the first time you do this: fill
the salt reservoir with water.
3. Position the funnel (see figure)
and fill the salt reservoir right up
thre
to s
7