IKEA HYGIENISK Руководство - Страница 13

Просмотреть онлайн или скачать pdf Руководство для Посудомоечная машина IKEA HYGIENISK. IKEA HYGIENISK 28 страниц.
Также для IKEA HYGIENISK: Руководство (32 страниц), Руководство (32 страниц), Руководство (28 страниц), Руководство (29 страниц)

Печатать страницу
IKEA HYGIENISK Руководство
ENGLISH
As the appliance stores the saved
settings, there is no need to configure it
before every cycle.
How to set the programme selection mode
The appliance is in programme selection
mode when the display shows the
programme number P4.
After activation, the appliance is in
programme selection mode by default. If
not, set the programme selection mode the
following way:
Press and hold RESET until the appliance is
in programme selection mode.
How to enter user mode
Make sure the appliance is in programme
selection mode.
To enter the user mode, press and hold
simultaneously
indicators
,
flash and the display is blank.
The rinse aid empty notification
The rinse aid helps to dry the dishes without
streaks and stains.
The rinse aid is automatically released
during the hot rinse phase.
When rinse aid chamber is empty, the rinse
aid indicator is turned on notifying to refill
rinse aid. If the drying results are
satisfactory while using multi-tablets only, it
is possible to deactivate the notification for
refilling rinse aid. However, for best drying
performance, always use rinse aid.
If standard detergent or multi-tablets
without rinse aid are used, activate the
notification to keep the rinse aid refill
indicator active.
and
until the
,
,
and
How to deactivate the rinse aid empty
notification
Make sure the appliance is in user mode.
1. Press
.
• The indicators
are off.
• The indicator
• The display shows the current setting.
–
= the rinse aid empty
notification is deactivated.
–
= the rinse aid empty
notification is activated.
2. Press
to change the setting.
3. Press the on/off button to confirm the
setting.
The rinse aid level
It is possible to set the released quantity of
rinse aid between level 1 (minimum
quantity) and level 6 (maximum quantity).
Level 0 deactivates the rinse aid dispenser
and no rinse aid is released.
Factory setting: level 4.
How to set the rinse aid level
Make sure the appliance is in user mode.
1. Press
.
• The indicators
are off.
• The indicator
• The display shows the current setting:
e.g.
= level 4.
– The levels of rinse aid are from
0A to 6A
where level 0A means rinse aid is
not used.
2. Press
repeatedly to change the
setting.
3. Press the on/off button to confirm the
setting.
13
,
,
and
still flashes.
,
,
and
still flashes.