HIKVISION DS-2CE18U8T-IT3 Руководство пользователя - Страница 8

Просмотреть онлайн или скачать pdf Руководство пользователя для DVR HIKVISION DS-2CE18U8T-IT3. HIKVISION DS-2CE18U8T-IT3 14 страниц. Turbohd 4k series bullet camera
Также для HIKVISION DS-2CE18U8T-IT3: Руководство пользователя (16 страниц), Краткое руководство по эксплуатации (17 страниц)

Note:

The supplied screw package contains self-tapping



screws, and expansion bolts.

For cement wall/ceiling, expansion bolts are



required to fix the camera. For wooden

wall/ceiling, self-tapping screws are required.

5. Connect the corresponding power cord, and video

cable.

6. Power on the camera to check whether the image

on the monitor is gotten from the optimum angle. If

not, adjust the surveillance angle.

Rotation Position

[0° to 360°]

1). Loosen the No.1 adjusting screw to adjust the

pan position [0° to 360°]. Tighten the No.1

adjusting screw.

2). Loosen the No.2 adjusting screw to adjust the

tilting position [0° to180°]. Tighten the No. 2

adjusting screw.

3). Loosen the No.3 adjusting screw to adjust the

rotation position [0° to 360°]. Tighten the No.3

adjusting screw.

Ceiling/Wall Mounting with Junction Box

2.2.2

Before you start:

You need to purchase a junction box separately.

Steps:

1. Paste the drill template on the ceiling/wall.

2. Drill screw holes and the cable hole (optional) in the

ceiling/wall according to the holes of the drill

template.

Note:

Drill the cable hole, when adopting ceiling outlet to

route the cable.

3. Take apart the junction box, and align the screw

holes of the bullet camera with those on the

Junction box's cover.

Figure 2-9 Fix the Camera to the Ceiling

Figure 2-10 3-Axis Adjustment

Pan Position

[0° to 360°]

Tilt Position

[0° to 180°]