HIKVISION DS-2CE56D8T-IT3E Руководство пользователя - Страница 6

Просмотреть онлайн или скачать pdf Руководство пользователя для DVR HIKVISION DS-2CE56D8T-IT3E. HIKVISION DS-2CE56D8T-IT3E 15 страниц. Bullet & turret camera
Также для HIKVISION DS-2CE56D8T-IT3E: Руководство пользователя (17 страниц), Краткое руководство по эксплуатации (17 страниц)

Figure 2-4 Secure the Camera with Mounting Base

8. Connect the corresponding cables, such as power

cord, and video cable.

9. Power on the camera to check whether the image

on the monitor is gotten from the optimum angle. If

not, adjust the camera according to the figure below

to get an optimum angle.

Pan Position

[0° to 360°]

Tilt Position

[0°to 75°]

1). Hold the camera body and rotate the enclosure

to adjust the pan position [0° to 360°].

2). Move the camera body up and down to adjust

the tilt position [0° to 75°].

3). Rotate the camera body to adjust the rotation

position [0° to 360°].

2.1.2 Mounting with Inclined Base

Steps:

1. Paste the drill template (supplied) to the place

where you want to install the camera.

2. Drill screw holes, and the cable hole on the

ceiling/wall according to the supplied drill template.

3. Disassemble the inclined base by the screw driver.

4. Install the turret camera's mounting base on the

inclined base cover with three PM4 screws.

Figure 2-7 Install Turret Camera's Mounting Base

5. Install the inclined base's body on the ceiling/wall

with four PA4 × 25 screws, as shown in Figure 2-8.

Figure 2-5 3-axis Adjustment

Figure 2-6 The Drill Template

Rotation Position

[0°to 360°]