Avantco 178UDD2HCS Руководство пользователя - Страница 15
Просмотреть онлайн или скачать pdf Руководство пользователя для Кухонная техника Avantco 178UDD2HCS. Avantco 178UDD2HCS 19 страниц. Beer dispensers
Также для Avantco 178UDD2HCS: Руководство пользователя (19 страниц), Руководство пользователя (19 страниц)
Печатать страницу
Cleaning the Condenser Coil
•
For efficient operation, keep the condenser surface free of dust, dirt, and lint.
•
We recommend cleaning the condenser coil at least once per month.
Cleaning the Fan Blades and Motor
•
If necessary, clean the fan blades and motor with a soft cloth.
•
If it is necessary to wash the fan blades, cover the fan motor to prevent moisture damage.
Cleaning the Interior of the Unit
•
When cleaning the cabinet interior, use a solvent of warm water and mild soap.
•
Do not use steel wool, caustic soap, abrasive cleaners, or bleach that may damage the interior finish.
•
Wash door gaskets on a regular basis, preferably weekly. Simply remove the door gasket from the
frame of the door, soak in warm water and soap for thirty (30) minutes, dry it with a soft cloth, and
replace it.
•
Check door gaskets for proper seal after they are replaced.
•
Periodically remove the shelves and pilasters from the unit and clean them with mild soap and warm
water. To remove the pilasters, first, remove the shelves and shelf brackets. Then, simply lift the
pilaster up and out.
Condenser Coil Cleaning Instructions:
A dusty condenser may lead to high energy consumption, less cooling effectiveness, and
compressor damage.
The condenser coil is located at the bottom behind the panel.
1. Disconnect the electrical power from the unit.
2. Remove the front cover and base cover with a screwdriver.
3. Using a soft brush and/or vacuum, remove the dirt, lint, etc. from the finned condenser coil in a
vertical direction.
4. Clean the condenser with a commercial condenser coil cleaner, available from any kitchen equipment
retailer. Ex. Noble Chemical Tech Line
5. After cleaning, straighten any bent condenser fins with a fin comb.
6. When finished, be sure to reinstall the front cover and base cover.
7. Reconnect the electrical power to the unit.
User Manual
Beer Dispensers
www.AvantcoRefrigeration.com
15