IKEA RENGORA Руководство - Страница 8

Просмотреть онлайн или скачать pdf Руководство для Посудомоечная машина IKEA RENGORA. IKEA RENGORA 32 страницы. Ikea dishwasher
Также для IKEA RENGORA: Руководство пользователя (24 страниц), Руководство пользователя (48 страниц), Руководство (24 страниц), Руководство (28 страниц), Руководство по установке (16 страниц), Руководство (28 страниц), Руководство (12 страниц), Руководство по эксплуатации (29 страниц), Руководство (29 страниц)

Печатать страницу
IKEA RENGORA Руководство
ENGLISH
ENGLISH
Make sure the cap is screwed on tightly, so that no detergent
can get into the container during the wash program (this could
damage the water softener beyond repair).
Make sure the cap is screwed on tightly, so that no detergent can
As soon as this procedure is complete, run a program without
ENGLISH
loading. The "Pre-Wash" program alone is NOT SUFFICIENT
get into the container during the wash program (this could damage
Residual saline solution or grains of salt can lead to corrosion,
the water softener beyond repair).
irreparably damaging the stainless steel components.
As soon as this procedure is complete, run a program without
The guarantee is not applicable if faults are caused by such
loading. The "Pre-Wash" program alone is NOT� � � � � �
Make sure the cap is screwed on tightly, so that no detergent can
ENGLISH
circumstances.
Residual saline solution or grains of salt can lead to corrosion,
get into the container during the wash program (this could damage
the water softener beyond repair).
irreparably damaging the stainless steel components.
Only use salt that has been specifically designed for
As soon as this procedure is complete, run a program without
The guarantee is not applicable if faults are caused by such
dishwashers. If the salt container is not filled, the water
loading. The "Pre-Wash" program alone is NOT� � � � � �
Make sure the cap is screwed on tightly, so that no detergent can
circumstances.
softener and the heating element may be damaged
Residual saline solution or grains of salt can lead to corrosion,
get into the container during the wash program (this could damage
� � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � �
as a result of limescale accumulation. Using of Salt is
irreparably damaging the stainless steel components.
the water softener beyond repair).
� � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � �
recommended with any type of dishwasher detergent.
The guarantee is not applicable if faults are caused by such
As soon as this procedure is complete, run a program without
circumstances.
heating element may be damaged as a result.
Whenever you need to add salt, it is mandatory to complete
loading. The "Pre-Wash" program alone is NOT� � � � � �
� � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � �
the procedure before the beginning of the washing cycle to
Whenever you need to add salt, it is mandatory to complete
Residual saline solution or grains of salt can lead to corrosion,
� � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � �
avoid corrosion.
irreparably damaging the stainless steel components.
the procedure before the beginning of the washing cycle.
heating element may be damaged as a result.
The guarantee is not applicable if faults are caused by such
Whenever you need to add salt, it is mandatory to complete
circumstances.
Setting the water hardness
SETTING THE WATER HARDNESS
the procedure before the beginning of the washing cycle.
� � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � �
To allow the water softener to work in a perfect way, it is
To allow the water softener to work in a perfect way, it is essential
� � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � �
essential that the water hardness setting is based on the actual
SETTING THE WATER HARDNESS
that the water hardness setting is based on the actual water hard-
heating element may be damaged as a result.
To allow the water softener to work in a perfect way, it is essential
water hardness in your house. This information can be obtained
ness in your house. This information can be obtained from your local
Whenever you need to add salt, it is mandatory to complete
that the water hardness setting is based on the actual water hard-
from your local water supplier. The factory sets the default value
the procedure before the beginning of the washing cycle.
water supplier. The factory setting is for average (3) water hardness.
ness in your house. This information can be obtained from your local
for the water hardness.
water supplier. The factory setting is for average (3) water hardness.
SETTING THE WATER HARDNESS
• Switch on the appliance by pressing the ON/OFF button.
• Switch on the appliance by pressing the ON/OFF button.
To allow the water softener to work in a perfect way, it is essential
• Switch on the appliance by pressing the ON/OFF button.
• Switch off the appliance by pressing the ON/OFF button.
• Switch off the appliance by pressing the ON/OFF button.
that the water hardness setting is based on the actual water hard-
• Switch off the appliance by pressing the ON/OFF button.
• Hold down button
• Hold down button
ness in your house. This information can be obtained from your local
• Hold down button
• Switch on the appliance by pressing the ON/OFF button.
water supplier. The factory setting is for average (3) water hardness.
• Switch on the appliance by pressing the ON/OFF button.
• Switch on the appliance by pressing the ON/OFF button.
•
The current selection level number and the salt indicator light
•
The current selection level number and the salt indicator light
• The current selection level number and the salt indicator light
• Switch on the appliance by pressing the ON/OFF button.
� � � � � �
� � � � � �
both flash
• Switch off the appliance by pressing the ON/OFF button.
•
Press button
•
Press button
to select the desired hardness level (see
to select the desired hardness level (see
• Press button
to select the desired hardness level (see
• Hold down button
for 5 seconds, until you hear a beep.
WATER HARDNESS TABLE).
WATER HARDNESS TABLE).
WATER HARDNESS TABLE).
• Switch on the appliance by pressing the ON/OFF button.
•
The current selection level number and the salt indicator light
Water Hardness Table
• Switch off the appliance by pressing the ON/OFF button.
Water Hardness Table
� � � � � �
Setting is complete!
Level
•
Press button
to select the desired hardness level (see
Level
WATER HARDNESS TABLE).
1
Soft
Water Hardness Table
Water Hardness Table
1
Soft
2
Medium
Level
3
Level
Average
2
Medium
German
4
Hard
degrees
3
Average
1
Soft
5
Very hard
2
Medium
4
Hard
1
Soft
3
Average
• Switch off the appliance by pressing the ON/OFF button.
5
Very hard
2
Medium
Setting is complete!
4
Hard
5
• Switch off the appliance by pressing the ON/OFF button.
Very hard
3
Average
FILLING THE RINSE AID DISPENSER
Setting is complete!
• Switch off the appliance by pressing the ON/OFF button.
Rinse aid makes dish DRYING easier. The rinse aid dispenser A
4
Hard
Setting is complete!
should be filled when the RINSE AID REFILL indicator light
FILLING THE RINSE AID DISPENSER
5
Very hard
in the control panel is lit.
FILLING THE RINSE AID DISPENSER
Rinse aid makes dish DRYING easier. The rinse aid dispenser A
Rinse aid makes dish DRYING easier. The rinse aid dispenser A
should be filled when the RINSE AID REFILL indicator light
Filling the rinse aid dispenser
should be filled when the RINSE AID REFILL indicator light
in the control panel is lit.
Rinse aid makes dish DRYING easier. The rinse aid dispenser A
in the control panel is lit.
should be filled when the RINSE AID REFILL indicator light
the control panel is lit.
B
1. Open the dispenser B by pressing and pulling up the tab on
the lid.
2. Carefully introduce the rinse aid as far as the maximum
(110 ml) reference notch of the filling space - avoid spilling it.
B
If this happens, clean the spill immediately with a dry cloth.
1. Open the dispenser B by pressing and pulling up the tab on
B
3. Press the lid down until you hear a click to close it.
the lid.
1. Open the dispenser B by pressing and pulling up the tab on
NEVER pour the rinse aid directly into the tub.
2. Carefully introduce the rinse aid as far as the maximum
the lid.
B
B
(110 ml) reference notch of the filling space - avoid spilling it.
2. Carefully introduce the rinse aid as far as the maximum
1. Open the dispenser
If this happens, clean the spill immediately with a dry cloth.
(110 ml) reference notch of the filling space - avoid spilling it.
3. Press the lid down until you hear a click to close it.
the lid.
NEVER pour the rinse aid directly into the tub.
If this happens, clean the spill immediately with a dry cloth.
2. Carefully introduce the rinse aid as far as the maximum (110
3. Press the lid down until you hear a click to close it.
ml) reference notch of the filling space - avoid spilling it. If this
NEVER pour the rinse aid directly into the tub.
happens, clean the spill immediately with a dry cloth.
3. Press the lid down until you hear a click to close it.
NEVER pour the rinse aid directly into the tub.
ENGLISH
Product description
7
8
for 5 seconds, until you hear a beep.
for 5 seconds, until you hear a beep.
for 5 seconds, until you hear a beep.
9
°dH
°dH
German degrees
French degrees
German degrees
0 - 6
0 - 10
0 - 6
7 - 11
11 - 20
°dH
°fH
°dH
°fH
12 - 17
21 - 30
7 - 11
French
German degrees
French degrees
18 - 34
31 - 60
degrees
12 - 17
0 - 6
0 - 10
35 - 50
61 - 90
7 - 11
11 - 20
18 - 34
0 - 6
0 - 10
12 - 17
21 - 30
35 - 50
7 - 11
11 - 20
18 - 34
31 - 60
11
35 - 50
61 - 90
12 - 16
21 - 29
17 - 34
30 - 60
Control panel
35 - 50
61 - 90
A
1
1.
On-Off/Reset button with indicator light
A
2.
Program selection button
3.
Salt refill indicator ligh
4.
Rinse Aid refill indicator ligh
A
A
5.
Program number and delay time indicator
6.
Tablet indicator light
by pressing and pulling up the tab on
B
First use
ADVICE REGARDING THE FIRST TIME USE
After installation, remove the stoppers from the racks and the
retaining elastic elements from the upper rack.
FILLING THE SALT RESERVOIR
The use of salt prevents the formation of LIMESCALE on the
dishes andon the machine's functional components.
As soon as this procedure is complete, run a program without
circumstances.
loading. The "Pre-Wash" program alone is NOT� � � � � �
� � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � �
Residual saline solution or grains of salt can lead to corrosion,
� � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � �
irreparably damaging the stainless steel components.
heating element may be damaged as a result.
The guarantee is not applicable if faults are caused by such
Whenever you need to add salt, it is mandatory to complete
circumstances.
the procedure before the beginning of the washing cycle.
� � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � �
� � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � �
SETTING THE WATER HARDNESS
heating element may be damaged as a result.
To allow the water softener to work in a perfect way, it is essential
Whenever you need to add salt, it is mandatory to complete
Adjusting the dosage of rinse aid
that the water hardness setting is based on the actual water hard-
the procedure before the beginning of the washing cycle.
If you are not completely satisfied with the drying results, you
ness in your house. This information can be obtained from your local
can adjust the quantity of rinse aid used.
water supplier. The factory setting is for average (3) water hardness.
SETTING THE WATER HARDNESS
ADJUSTING THE DOSAGE OF RINSE AID
• Switch the dishwasher on using the ON/OFF button.
• Switch on the appliance by pressing the ON/OFF button.
To allow the water softener to work in a perfect way, it is essential
• Switch it off using the ON/OFF button.
If you are not completely satisfied with the drying results, you can
that the water hardness setting is based on the actual water hard-
• Switch off the appliance by pressing the ON/OFF button.
• Press button
adjust the quantity of rinse aid used.
ness in your house. This information can be obtained from your local
• Hold down button
water supplier. The factory setting is for average (3) water hardness.
• Switch it on using the ON/OFF button.
• Switch on the appliance by pressing the ON/OFF button.
• Switch the dishwasher on using the ON/OFF button.
•
The current selection level number and the salt indicator light
• The current selection level number and rinse aid indicator
• Switch it off using the ON/OFF button.
ADJUSTING THE DOSAGE OF RINSE AID
• Switch on the appliance by pressing the ON/OFF button.
� � � � � �
light flash.
• Press button
If you are not completely satisfied with the drying results, you can
• Switch off the appliance by pressing the ON/OFF button.
•
Press button
• Press button
adjust the quantity of rinse aid used.
• Hold down button
• Switch it on using the ON/OFF button.
WATER HARDNESS TABLE).
supplied.
• Switch the dishwasher on using the ON/OFF button.
• Switch on the appliance by pressing the ON/OFF button.
•
The current selection level number and rinse aid indicator light flash.
• Switch it off using the ON/OFF button.
•
The current selection level number and the salt indicator light
• Switch it off using the ON/OFF button.
ADJUSTING THE DOSAGE OF RINSE AID
•
Press button
• Press button
� � � � � �
If you are not completely satisfied with the drying results, you can
Setting is complete!
supplied.
s.
Level
• Switch it on using the ON/OFF button.
•
Press button
adjust the quantity of rinse aid used.
• Switch it off using the ON/OFF button.
•
The current selection level number and rinse aid indicator light flash.
If the rinse aid level is set to ZERO (ECO), no rinse aid will be
WATER HARDNESS TABLE).
• Switch the dishwasher on using the ON/OFF button.
1
•
Press button
supplied. The LOW RINSE AID indicator light will not be lit if you
Setting is complete!
• Switch it off using the ON/OFF button.
2
Medium
supplied.
s.
run out of rinse aid. A maximum of 5 levels can be set according
• Press button
three times - a beep will be heard.
If the rinse aid level is set to ZERO (ECO), no rinse aid will be
• Switch it off using the ON/OFF button.
3
Average
to the dishwasher model. The factory setting is specific to the
Level
• Switch it on using the ON/OFF button.
supplied. The LOW RINSE AID indicator light will not be lit if you
Setting is complete!
•
The current selection level number and rinse aid indicator light flash.
model, please follow instruction above to check this for your
4
run out of rinse aid. A maximum of 5 levels can be set according to
1
If the rinse aid level is set to ZERO (ECO), no rinse aid will be
•
Press button
to select the level of rinse aid quantity to be
machine.
5
Very hard
the dishwasher model. The factory setting is specific to the model,
supplied. The LOW RINSE AID indicator light will not be lit if you
2
Medium
s.
supplied.
• If you see bluish streaks on the dishes, set a low number (1-2).
run out of rinse aid. A maximum of 5 levels can be set according to
please follow instruction above to check this for your machine.
• Switch it off using the ON/OFF button.
3
Average
• Switch off the appliance by pressing the ON/OFF button.
• If there are drops of water or limescale marks on the dishes,
the dishwasher model. The factory setting is specific to the model,
Setting is complete!
• If you see bluish streaks on the dishes, set a low number (1-2).
Setting is complete!
set a high number (3-4).
4
please follow instruction above to check this for your machine.
• If there are drops of water or limescale marks on the dishes,
If the rinse aid level is set to ZERO (ECO), no rinse aid will be
• If you see bluish streaks on the dishes, set a low number (1-2).
5
Very hard
supplied. The LOW RINSE AID indicator light will not be lit if you
set a high number (3-4).
FILLING THE RINSE AID DISPENSER
• If there are drops of water or limescale marks on the dishes,
Filling the detergent dispenser
run out of rinse aid. A maximum of 5 levels can be set according to
set a high number (3-4).
Rinse aid makes dish DRYING easier. The rinse aid dispenser A
• Switch off the appliance by pressing the ON/OFF button.
Usage of detergent not designed for dishwashers may cause
the dishwasher model. The factory setting is specific to the model,
should be filled when the RINSE AID REFILL indicator light
Setting is complete!
malfunction or damage to the appliance.
please follow instruction above to check this for your machine.
FILLING THE DETERGENT DISPENSER
in the control panel is lit.
To achieve the best washing and drying results, the combined
• If you see bluish streaks on the dishes, set a low number (1-2).
FILLING THE DETERGENT DISPENSER
FILLING THE RINSE AID DISPENSER
� � � � � � � � � � � � � � � � � � � � � � � � � � � � � �
• If there are drops of water or limescale marks on the dishes,
useof detergent, rinse aid liquid and refined salt is required. We
� � � � � � � � � � � � � � � � � � � � � � � � � � � � � �
set a high number (3-4).
dishwashers.
Rinse aid makes dish DRYING easier. The rinse aid dispenser A
recommend using detergents that do not contain phosphates
dishwashers.
should be filled when the RINSE AID REFILL indicator light
or chlorine, as these products are harmful to the environment.
To achieve the best washing and drying results, the combined
To achieve the best washing and drying results, the combined
in the control panel is lit.
Good washing results also depend on the correct amount of
useof detergent, rinse aid liquid and refined salt is required.
useof detergent, rinse aid liquid and refined salt is required.
FILLING THE DETERGENT DISPENSER
We recommend using detergents that do not contain phosphates
detergent being used.
We recommend using detergents that do not contain phosphates
� � � � � � � � � � � � � � � � � � � � � � � � � � � � � �
or chlorine, as these products are harmful to the environment.
Exceeding the stated amount does not result in a more effective
or chlorine, as these products are harmful to the environment.
dishwashers.
Good washing results also depend on the correct amount of
wash and increases environmental pollution. The amount can
To achieve the best washing and drying results, the combined
Good washing results also depend on the correct amount of
detergent being used.
°fH
be adjusted to the soil level. In the case of normally soiled items,
useof detergent, rinse aid liquid and refined salt is required.
detergent being used.
°fH
1. Open the dispenser B by pressing and pulling up the tab on
Exceeding the stated amount does not result in a more effective
We recommend using detergents that do not contain phosphates
use approximately either 35g (powder detergent) or 35ml (liquid
French degrees
the lid.
Exceeding the stated amount does not result in a more effective
wash and increases environmental pollution.
or chlorine, as these products are harmful to the environment.
detergent) and additional tea spoon of detergent directly inside
The amount can be adjusted to the soil level. In the case of
2. Carefully introduce the rinse aid as far as the maximum
wash and increases environmental pollution.
0 - 10
Good washing results also depend on the correct amount of
the tub. If tablets are used, one tablet will be enough.
normally soiled items, use approximately either 35g (powder
(110 ml) reference notch of the filling space - avoid spilling it.
°Clark
detergent being used.
The amount can be adjusted to the soil level. In the case of
If the crockery is only lightly soiled or if it has been rinsed
11 - 20
detergent) or 35ml (liquid detergent) and additional tea spoon of
If this happens, clean the spill immediately with a dry cloth.
English
Exceeding the stated amount does not result in a more effective
1. Open the dispenser B by pressing and pulling up the tab on
normally soiled items, use approximately either 35g (powder
with water before being placed in the dishwasher, reduce the
detergent directly inside the tub. If tablets are used, one tablet
3. Press the lid down until you hear a click to close it.
degrees
21 - 30
wash and increases environmental pollution.
the lid.
detergent) or 35ml (liquid detergent) and additional tea spoon of
NEVER pour the rinse aid directly into the tub.
amount of detergent used accordingly (minimum 25 g/ml) e.g.
will be enough.
The amount can be adjusted to the soil level. In the case of
2. Carefully introduce the rinse aid as far as the maximum
detergent directly inside the tub. If tablets are used, one tablet
If the crockery is only lightly soiled or if it has been rinsed with
31 - 60
skip the powder/gel putted inside the tub.
0 - 7
normally soiled items, use approximately either 35g (powder
(110 ml) reference notch of the filling space - avoid spilling it.
water before being placed in the dishwasher, reduce the amount
will be enough.
detergent) or 35ml (liquid detergent) and additional tea spoon of
If this happens, clean the spill immediately with a dry cloth.
61 - 90
To open the detergent dispenser press button C.
of detergent used accordingly (minimum 25 g/ml) e.g. skip the
8 - 14
If the crockery is only lightly soiled or if it has been rinsed with
detergent directly inside the tub. If tablets are used, one tablet
3. Press the lid down until you hear a click to close it.
powder/gel putted inside the tub.
Introduce the detergent into the dry dispenser D only.
will be enough.
NEVER pour the rinse aid directly into the tub.
water before being placed in the dishwasher, reduce the amount
15 - 20
Place the amount of detergent for
If the crockery is only lightly soiled or if it has been rinsed with
of detergent used accordingly (minimum 25 g/ml) e.g. skip the
pre-washing directly inside the tub.
water before being placed in the dishwasher, reduce the amount
powder/gel putted inside the tub.
21 - 42
of detergent used accordingly (minimum 25 g/ml) e.g. skip the
powder/gel putted inside the tub.
43 - 62
B
A
B
h
D
in
B
A
C
A
1.
When measuring out the detergent refer to the mentioned ear-
lier information to add the proper quantity. Inside the dispenser
2
3 4
5
6 7 8
B there are indications to help the detergent dosing.
2.
Remove detergent residues from the edges of the dispenser
and close the cover until it clicks.
1.
When measuring out the detergent refer to the mentioned ear-
3. Close the lid of the detergent dispenser by pulling it up until
clicks.
1.
When measuring out the detergent refer to the mentioned ear-
lier information to add the proper quantity. Inside the dispenser
A
the closing device is secured in place.
3. Close the lid of the detergent dispenser by pulling it up until
B there are indications to help the detergent dosing.
lier information to add the proper quantity. Inside the dispenser
2.
Remove detergent residues from the edges of the dispenser
the closing device is secured in place.
The detergent dispenser automatically opens up at the right time
B there are indications to help the detergent dosing.
and close the cover until it clicks.
according to the program. If all-in-one detergents are used, we
2.
Remove detergent residues from the edges of the dispenser
The detergent dispenser automatically opens up at the right
3. Close the lid of the detergent dispenser by pulling it up until
recommend using the TABLET button, because it adjusts the
time according to the program. If all-in-one detergents are used,
and close the cover until it clicks.
the closing device is secured in place.
program so that the best washing and drying results are always
we recommend using the TABLET button, because it adjusts the
3. Close the lid of the detergent dispenser by pulling it up until
achieved.
The detergent dispenser automatically opens up at the right time
program so that the best washing and drying results are always
the closing device is secured in place.
according to the program. If all-in-one detergents are used, we
achieved.
recommend using the TABLET button, because it adjusts the
The detergent dispenser automatically opens up at the right time
program so that the best washing and drying results are always
according to the program. If all-in-one detergents are used, we
achieved.
recommend using the TABLET button, because it adjusts the
program so that the best washing and drying results are always
achieved.
three times - a beep will be heard.
for 5 seconds, until you hear a beep.
three times - a beep will be heard.
to select the desired hardness level (see
to select the level of rinse aid quantity to be
for 5 seconds, until you hear a beep.
Water Hardness Table
to select the level of rinse aid quantity to be
three times - a beep will be heard.
°dH
to select the desired hardness level (see
German degrees
Soft
0 - 6
to select the level of rinse aid quantity to be
Water Hardness Table
7 - 11
°dH
12 - 17
German degrees
Hard
18 - 34
Soft
0 - 6
35 - 50
7 - 11
12 - 17
1
Hard
18 - 34
35 - 50
2
3
4
5
B
6
B
10
To open the detergent dispenser
press button A.
Introduce the detergent into
the dry dispenser B only.
To open the detergent dispenser
Place the amount of detergent
press button A.
for pre-washing directly inside
the tub.
Introduce the detergent into
the dry dispenser B only.
Place the amount of detergent
3sec
for pre-washing directly inside
the tub.
9
10
11
7.
Display
8.
Half Load indicator light
9.
Half Load button
10. Delay button
11. START/Pause button with indicator light / Tab
• Switch the dishwash
• Press button
• Switch it off using th
s.
supplied.
• Press button
• Switch it off using th
• Switch it on using th
Setting is complete!
•
The current selection
8
If the rinse aid level is
•
Press button
supplied. The LOW RIN
s.
supplied.
run out of rinse aid. A m
• Switch it off using th
the dishwasher model.
Setting is complete!
please follow instruction
If the rinse aid level is
• If you see bluish stre
supplied. The LOW RIN
• If there are drops of
run out of rinse aid. A m
set a high number (3
the dishwasher model.
please follow instruction
8
• If you see bluish stre
FILLING THE DETE
• If there are drops of
� � � � � � � � � �
set a high number (3
dishwashers.
To achieve the best wa
8
useof detergent, rinse
FILLING THE DETE
We recommend using
� � � � � � � � � �
or chlorine, as these pr
dishwashers.
Good washing results
To achieve the best wa
detergent being used.
°fH
useof detergent, rinse
French degrees
Exceeding the stated a
We recommend using
wash and increases en
0 - 10
or chlorine, as these pr
The amount can be ad
Good washing results
11 - 20
normally soiled items,
detergent being used.
°fH
21 - 30
detergent) or 35ml (liqu
French degrees
Exceeding the stated a
detergent directly insid
31 - 60
wash and increases en
0 - 10
will be enough.
61 - 90
The amount can be ad
11 - 20
If the crockery is only l
normally soiled items,
water before being pla
21 - 30
detergent) or 35ml (liqu
of detergent used acco
detergent directly insid
31 - 60
powder/gel putted insid
will be enough.
61 - 90
If the crockery is only l
1.
Upper rack
water before being pla
2.
� � � � � � �
of detergent used acco
3.
Upper rack height adjuster
powder/gel putted insid
4.
Upper sprayer arm
B
5.
Lower rack
A
6.
Cutlery basket
7.
Lower sprayer arm
B
8.
Filter Assembly
9.
Salt reservoir
A
10. Detergent and Rinse Aid dispensers
1.
When measuring ou
A
lier information to a
11. Rating plate
B there are indicatio
12. Control panel
2.
Remove detergent
and close the cover
1.
When measuring ou
A
3. Close the lid of the
lier information to a
the closing device i
B there are indicatio
2.
Remove detergent
The detergent dispens
and close the cover
according to the progr
3. Close the lid of the
recommend using the
the closing device i
program so that the be
achieved.
The detergent dispens
according to the progr
recommend using the
program so that the be
achieved.
1. When measuring out
To open the detergent dispenser
the detergent refer to
press button A.
the mentioned earlier
information to add the
Introduce the detergent into
proper quantity. Inside
the dry dispenser B only.
the dispenser
there
D
Place the amount of detergent
are indications to help
for pre-washing directly inside
the detergent dosing.
the tub.
2. Remove detergent
residues from the edges
of the dispenser and
close the cover until it
1. Remove the lower rack and
unscrew the reservoir cap
(anticlockwise).
2. Only the first time you do this: fill
the salt reservoir with water.
3. Position the funnel (see figure)
and fill the salt reservoir right up
to s
thre
to s
8
7