GAPOSA Emitto Smart 16 Руководство - Страница 14

Просмотреть онлайн или скачать pdf Руководство для Передатчик GAPOSA Emitto Smart 16. GAPOSA Emitto Smart 16 20 страниц. Channels handheld display remote, 16 channels handheld display remote with timer 868 mhz range
Также для GAPOSA Emitto Smart 16: Руководство (20 страниц)

Печатать страницу

LIMIT SWITCH

LIMIT SWITCH SETUP

ATTENTION: ALWAYS SET THE UP LIMIT FIRST

Push the PROG-FC button until the motor makes a

brief jog.

Note: during "programming mode" the

operations are in "deadman control"

Press and hold the UP button and run the motor to

the desired UP limit position.

Press STOP to set the UP limit position. The motor

makes a brief jog.

Press and hold the DOWN button and run the

motor to the desired DOWN limit position.

Press STOP to set the DOWN limit position.

The motor makes a brief jog.

Note: accurate limit setting can be performed when UPWARD or DOWNWARD by pressing the

PROG-FC button a second time. The motor then moves slowly in steps towards the desired limit.

Always press STOP button to set the limit position.

AUTOMATIC SETTING OF THE LIMITS

For limits set with torque sensor ( mechanical stop of shutters or cassette awnings/shades), press

and hold UP button until the bottom bar hits the cassette or shutter box.

A short jog will indicate that the UP position has been memorized. The same procedure can be

followed for DOWN limit but only for roller shutters.

(Just for motors with electronic limit switch)