GAPOSA EMITTO SMART16 Руководство монтажника - Страница 3

Просмотреть онлайн или скачать pdf Руководство монтажника для Передатчик GAPOSA EMITTO SMART16. GAPOSA EMITTO SMART16 7 страниц. 16 channels hand held display remote with timer
Также для GAPOSA EMITTO SMART16: Краткое руководство по эксплуатации (12 страниц)

Печатать страницу

SELECTING A CHANNEL/GROUP

When pressing the circle button

switched from single channel control mode to group control mode.

Briefly press the circle button

the channels with the arrow buttons (◄ or ►): each channel is identi-

fied by a number.

Briefly press the circle button

group to appear is the all channels group. Scroll through the pre-made

groups with the arrow buttons (◄ or ►): each group is identified by a

number.

Note: Only the groups that have been created previously (see section be-

low) will appear. No groups will appear if groups have not been

created previously.

CUSTOMIZATION OF THE GROUPS

1. Briefly press the circle button

2. To create a group press both arrow buttons (◄ and ►) for 2 seconds. The icon

channel 1 starts flashing.

3. Using the arrow buttons (◄ or ►), scroll to the channel to be set into the group.

4. Press for 2 seconds both arrow buttons (◄ and ►) to select the channel. Then move to the other

channels to be set and select each one in the same fashion.

5. When all the desired channels of the group are set press the

to confirm the group. The group is identified by a number. The group you set takes the first number

available in progressive fashion from 1 to 8.

Note: Only 8 groups can be created.

DELETING GROUPS

1. Enter the group screen by pressing the circle button

2. Press and hold the circle button

3. Press the

STOP button to enter the delete groups mode.

4. Page through the saved groups using the left and right arrow buttons.

5. Once the group that needs to be deleted is selected, press the

Note: the delete groups mode can be exited at any time by pressing the circle button

HIDING CHANNELS

1. Make sure the channel selection screen is visible, it can be changed by pressing the circle button

2. Press and hold the circle button

3. Press the

STOP button to enter

4. By pressing the left and right arrow buttons, the required hidden channels can be selected.

5. Once the required hidden channels are selected, press the

channels. The numbers on the screen will blink quickly for confirmation.

Note: Channels can be unhidden using the same process. Just deselect the channels.

sequentially the modes can be

to enter single channel mode, scroll

to enter group control mode. The first

www.AVOutlet.com

to enter in group control mode

until

channels mode.

UP,

appears on screen.

STOP button to confirm the deletion.

appears on screen.

STOP button to confirm the hidden

appears and

STOP or

DOWN button

again.